Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

mx882 printing crooked

My Canon MX882 has begun to print a little crooked dispite the paper being seated properly from the read feed.  It's not off too much, maybe 3/16" from edge to edge but it's definitely noticable.   Has anyone else experienced this and if so what is t...

new MX922: strip lines at the bottom of photos

Printing was generally ok from the beginning to the middle. However when printing reached the end, multiple non-even strip lines appeared (horizontal). I have tried all kinds of cleaning as well as setting "prevent paper abrasion" but they are not he...

lz1 by Apprentice
  • 2460 Views
  • 0 replies
  • 0 likes

offline message when trying to print

I had to move due to necessary elevation of my home caused by super storm Sandy. I can't print at my new location and have tried everything, but I am not anywhere near a computer expert. I am using a friend's internet connection and can't print any l...

treyn by Apprentice
  • 2835 Views
  • 2 replies
  • 0 likes

mx870 that will not print

I have a mx870 printer that will print the test page and alignment page, but when I try to scan, copy or print a document it acts like it is printing, and sounds like it is printing, but the page comes out blank.  Any sugestions?

dawn1 by Apprentice
  • 4198 Views
  • 1 replies
  • 0 likes

printer error.

i have a problem with  my canon mx394 inkjet printer it is not working only displays a printer error  occurred what i do to solve this.

chusta by Apprentice
  • 3866 Views
  • 0 replies
  • 0 likes

MX922 won't actually print

Earlier today the printer was working fine.  Then, I tried to print something else and it sucked up a piece of paper and chugged around like it was printing.  However, it spit out a blank page.  I tried printing the test pages and all the other thing...

LindaT49 by Contributor
  • 2640 Views
  • 1 replies
  • 0 likes

printer not scanning

I have an Canon MP 230 printer that is not scanning.  I am able to print documents however.  I have tried suggestions posted earlier.  Any help would greatly be appreciated.  Thank you.

typist1 by Apprentice
  • 2815 Views
  • 2 replies
  • 0 likes

OSX 10.10.3 Destroys TWO Pixma ip4200 printers

Last week, while on the road, I tried, for the first time since updating to OSX 10.10.3, to print on a friends ip4200.At first I got the "printer not connected" message, even though the printer powered up on the "print" command. I did a "repair permi...

zarquonp by Apprentice
  • 2743 Views
  • 0 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!