Canon Desktop Inkjet Printers Forum

Pixma MG5600

Right in the middle of printing it just died. Power is going to it, but nothing showing powered on the unit. No lights, etc. What's going on with it?

MX922 support code 1300 paper jam

My mx922 recently started showing a jam error message after the first page prints. I have taken the cassettes out, opened the ink cartridge door and removed the rear panel roller area and there is no jam. If I turn it off and restart, same issue, one...

Tiny spring fell out of my PIXMA TS8020

A tiny straight spring with no end hooks fell out of my TS8020. Approximately 14 mm long and 1.3 mm wide. Does anyone have an idea of where this is supposed to go? At first I got an error but then I powered down/up the printer and it seems to pri...

mx922 printer -- suddenly all black characters are printing green --

Excellent printer, owned for several years, and suddenly all black characters are printing green. Changed cartridges but still happening. Cleaned and "deep cleaned" but still green...... what is happening and what should I do.

test

why message not here later but seen immediately after posting

Pixma MG3620

I’ve used this before. But now when I turn on, power lite alternates with alarm light underneath, both flashing. Using it with iPad and iPhone, as before. Both have driver installed and I can connect to printer through WiFi network choices. Just can...

MG7150 scans are fuzzy

My MG7150 prints fine, but since upgrading to OSX Mojave the scans are fuzzy. Can anyone suggest a solution please?

mx 310 software download?

I have a working printer, but a new computer and no software. I wen tot software downloads page, but there is no where to click on downlaod for my MAC

MX490 Printing not aligned

Print is not aligned when I print or scan. I have performed print alignment several times with the same results.

MX892 Problem since Windows 10 Upgrade

Don Here: I recently upgraded to Windows 10 from W7. Printer worked fine before the upgrade. Now I keep getting a message that 'Canon MP Navigator EX has stopped working'. Microsoft has spent hours trying to find the cause. Windows 10 has been instal...

PRINTER

cannot print the bottom page using iP2770 canon printer. HELP.

MX882 error code U052

My Pixma MX882 shows error code U052, "The type of print head is incorrect. Install the correct print head." It had been working fine. Now it won't even print a test page and, BTW, I didn't change out the print head. What's wrong here?

CP900 fails to boot (shows Canon screen but never progresses)

Even after disconnecting power for 24hrs, when powering on my CP900 shows the Canon screen but never progresses past that state. Is there a way to hard-factory-reset at power-on ?Any other ideas or solutions to revive it?

MX922 support code 1300 paper jam

My mx922 recently started showing a jam error message after the first page prints. I have taken the cassettes out, opened the ink cartridge door and removed the rear panel roller area and there is no jam. If I turn it off and restart, same issue, one...

Pixma MX700

I think I need a new printer head for Pixma MX700. Printer not printing, cleaned printer head but still not printing.

Canon Community

Posts

Pixma MG5600

MX922 support code 1300 paper jam

Tiny spring fell out of my PIXMA TS8020

mx922 printer -- suddenly all black characters are printing green --

test

Pixma MG3620

MG7150 scans are fuzzy

mx 310 software download?

MX490 Printing not aligned

MX892 Problem since Windows 10 Upgrade

PRINTER

MX882 error code U052

CP900 fails to boot (shows Canon screen but never progresses)

MX922 support code 1300 paper jam

Pixma MX700

Canon E477 : problem not showing any light in prin...

Canon PIXMA MP560 printer colors not right

Canon MB2720 will not double-side print

Wireless printing from iphone12

Cannon printer TR8622a - color ink wells going low...

PIXMA MX922 shows no color next to BK in nozzle ch...

PIXMA MX922 won't scan on macOS 15.1.1

PIXMA TS8320--how to fax?

Error 5100 trying to set up new TS9521c

Does the MegaTank Pixma G4280 have a user replacea...