Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Double Sided Printing MX920

Our MX920 printer skips the back of the 1st sheet when printing double sided.  I printed a 15 page document and page 1 printed on the 1st sheet and the 2nd page printed on the 2nd sheet.  The 1st sheet was the only one that had only one page on it.  ...

DBob by Contributor
  • 1018 Views
  • 0 replies
  • 0 likes

Resolved! PIXMA iP1700 Error 5100

Pixma iP1700 -- Paper jammed, cleared paper without it tearing, now nothing will print, not test page nor when I run print head alignment.  I get message to clear paper jam, but there is no jam.  I can hear document spooling, but when printer attempt...

Rukbat by Apprentice
  • 3234 Views
  • 3 replies
  • 0 likes

Resolved! PIXMA MP510 Ink usage

My question is about possible ink usage when the printer is turned on. I have been told by a printer repair service, that when I turn off my Canon MP510 printer and then turn it on back on at some point, the printer automatically use's ink when I tur...

Re: Canon MG5750 print overlay problem

Re examining the prints, I've come to the conclusion that the problem must lie somewhere in the carriage positioning system. As far as I can see the position encoder is the film strip which passes through a sensor on the print head carriage and close...

Amalfi by Contributor
  • 1817 Views
  • 4 replies
  • 0 likes

MG5750

Just bought a Pixma MG5750 to replace my broken MG5350    Very pleased  One thing I have noticed is that the 5750 seems to self clean more often than my old 5350 did.  Maybe because its new  I only ask because before my 5350 I had an Epson that stopp...

Resolved! PIXMA MG6620 - Error #1403

I got an Error code #1403 saying "The type of print head is incorrect"I have removed it, cleaned it, followed all the instructions and put i back.No way...I called Canon support but got no help.It is probably because the printer is out of warranty,Wh...

Mirko65 by Apprentice
  • 10406 Views
  • 7 replies
  • 0 likes

Rundll message with Pixma TS952C

My computer is an HP Envy with Windows 10 purchased 5 months ago.  I have a Pixma TS9521C purchased about 8 months ago .I had to reinstall it (the printer) after my 4-month old computer had to be reset to factory condition and Windows 10 reinstalled....

Martha5 by Contributor
  • 1220 Views
  • 1 replies
  • 0 likes

Think I SNAFUed my printer

My Pixma ip8720 was printing bad streaks just on black areas of photos. I thought print head needed cleaning so took it out and cleaned it. Now I have two different problems. The first is that the carriage will not center. It moves back and forth but...

meamjw by Apprentice
  • 1408 Views
  • 1 replies
  • 0 likes

mx 992 error 1007 only for 5x7 photo paper

So my mx992 gives the error code 1007 (no paper) in the upper cassette only for 5x7 photo paper. 4x6 paper prints fine as does full size photo paper in the lower cassette. Canon wont support on th ephone so I thought I'd check here. Thanks in advance...

tater911 by Apprentice
  • 717 Views
  • 0 replies
  • 0 likes

Scanner selection with two MX922 printers

My primary computer gave up the ghost so I had to switch to my backup. I have both MX922s connected via wireless and can print to ether. However, I have a couple of issues: 1> How can I change the name of the printers? For some reason 1 &2 have becom...

wlathan by Contributor
  • 1747 Views
  • 2 replies
  • 0 likes

tr4520 document size

Get the error message that i  have the wrong size paper in the printer. I am trying to print 8-1/2x11, I set all the print preferences to 8-1/2x11, bet the printer thinks I have 4x6. tried resetting on the printer control panel but it doesn' give me ...

kwc by Contributor
  • 1485 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements