Desktop Inkjet Printers
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

Cannon MX 450Printer

Im not about to printer and continue to receive error messages.  I have removed the printer and readded, cut the printer off and reboted but nothing has happened.  Currently, I have items in the que that have not printed. Can you help? Thanks

fitdiva by Apprentice
  • 2289 Views
  • 2 replies
  • 0 likes

TS9120 Auto Retract Paper Tray & Door?

I've had my TS9120 for about a month now, and love it! But there are 2 things that have bugged me from the start.:When I power off the printer from the physical button, why does it ask to retract the tray? If I'm powering it off, I've obviously pulle...

Resolved! MG6620 error 9,244,3 - HELP!

I just purchased the MG6620 and upgraded to W10.  I cannot scan from the flatbed.  I continue to get the "You do not have required privileges" and error 9,244,3.  I have re-installed the drivers but to no avail.  I cannot even find the program to run...

ACM525 by Apprentice
  • 4579 Views
  • 3 replies
  • 0 likes

MX722 Output tray removal

HI, Can anyone tell me how to remove the output tray on my MX722? It is broken and I have a second tray to swap out but can't figure out how to get the tray off the nit. Any photos would also be helpful or if ayone knows where i can get a guide or ma...

Resolved! canon pixma 3500 error message

there was a paper jam.  I cleared the jam, but am getting 5100 error message and cannot print.  How do I fix this?  Is the primter broken?????Please help! 

joann1 by Apprentice
  • 5044 Views
  • 3 replies
  • 0 likes

Pixma 922 Prints Only Outlines in Photoshop CC

Good day.  I just picked up a Pixma 922 for my Windows 10 PC.  I do a large part of my printing via Photoshop CC, and I cannot get the printer to print more than vague outlines when printing directly from Photoshop CC.  I am able to save it as a jpg ...

Naumatt by Apprentice
  • 3236 Views
  • 1 replies
  • 0 likes

MX922 custom scan location

I've tried setting a custom directory for the MX922 to save scans (specifically to my Dropbox folder) but it will only save to My Documents. I've tried custom setting it for each scan type but it refuses to save anywhere else. I'm trying to set it vi...

ubrgeek by Apprentice
  • 17611 Views
  • 6 replies
  • 0 likes

How to print colour photo in greyscale?

I have Canon MP140 Pixma with Win 10. I normally only need to print text, so I only ever replace the black cartridge. The colour cartridge has been empty for years. I now need to print a colour JPG in black and white. So far, I can only print blank p...

MX922 Profiles won't stick

I had an MX860 printer, installed under Windows 7, attached through a wired network, and it served me well, even when I upgraded my computer to Windows 10. After a hard drive failure, I re-installed Win10, and all of a sudden it dien't work all that ...

cherns by Apprentice
  • 2928 Views
  • 1 replies
  • 0 likes

Legal Size Paper

I just bought a Canon Printer MX922.  But on the the printer setup there is NO option for legal size paper? How can this be fixed?

Navedo07 by Apprentice
  • 3816 Views
  • 2 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!