Desktop Inkjet Printers
Showing results for 
Show  only  | Search instead for 
Did you mean: 


Warranty Return for Pixma G2260

I need to return, under warranty, my Pixma G2260 Mega Tank printer. I have received the new printer and was instructed to use the box and packing materials the replacement came in to return my old printer. However, I'm not sure about how to pack the ...

gjm9633 by Apprentice
  • 1 replies

PIXMA G620 can no longer printer 4x6?

I've had a G620 for a bit over a year now, and it's been great up until last week. 8.5x11 and 4x6 prints were coming out beautifully with no problems. However, 4x6 printing is no longer working as of this week. I load up the paper and select "4x6 pap...

rkwok96 by Apprentice
  • 5 replies

Canon MX922 Grooved mark on Paper

I just recently noticed that there is a grooved mark on my printed documents.  It's down the whole length of the page and starts 2/3 across of a 8.5 x 11 piece of paper.  It feels like two raised lines that are less than 1/4 apart from each other.  I...

JRK61263 by Apprentice
  • 0 replies

Eeprom Reset Canon G2100

Please, I need your help with My problema: i need to know which are tools (Hardware/Software) to reset/re-program Eeprom for My printer G2100 model. Also, where i get the bin files source for re-program Eeprom. My board has they folowing serial numbe...

wxapazmi by Apprentice
  • 0 replies

TS3522 Scan page is half faded

Hi Canon Team,I recently purchases the Canon TS3522 Pixma printer with scanner. When I try to do a scan, the image or document is half faded. The half is good and other half is faded a bit which is noticeable. The image is shown below.Do we know if t...


Driver for mg8220

I just got a new computer and I'm trying to find a driver to install for my mg8220, but just keep getting messages saying it is retired, is there any way to use this printer on my computer and find the driver to download?

capgeo by Apprentice
  • 0 replies

Resolved! Mg8220 and new computer running win 10 drivers help

Hi, I need to install new drivers on my pc running win10 x64. I have an MG8220 multifunction printer. There are several drivers and I need help choosing between the xps and mp drivers. Can you tell me what to choose please? MG8200 series MP Driver Ve...

Smiseel by Apprentice
  • 2 replies

PIXMA MG2522 Driver Installation Stalls

I am unable to download my drivers for my printer. I'm trying to download them via the Internet and not a CD. Every time I try I get to stage 3 and it will not go anywhere from there, it just says waiting for connection and it never happens.Does anyb...

Resolved! Pixma MX410 ink absorber reset

My Pixma MX410 ink absorber pads have been cleaned and replaced, but the "contact service center" error keeps appearing on startup.  I've read several posts that tell how to reset the ink absorber error, but none of them work on this printer. The blo...

rs160030 by Apprentice
  • 3 replies
Getting started

New to the community? Here's some information to help you get acquainted:

11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version is available for EOS-C500 Mark II
05/26/2022: New firmware version is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version is available for EOS R5 C
03/23/2022: New firmware version is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!