12-10-2020 05:35 PM
I'm trying to print greeting cards on card stock. It prints fine on regular paper but when I try to print on card stock (same size: 8 1/2 x 11 inches) it begins printing on the very edge of the card. The printing should be beginning about 1/2 inch from edge. Anyone else having this problem? I've looked everywhere throughout the printer settings and found no way to change this. I've never had a problem with any other injet printing greeting cards. Any and all help appreciated.
02-23-2021 10:50 AM
Hi Jocarbo,
Please contact one of Canon's Technical Support Representatives via phone or chat. To contact a Technical Support Representative, please use the link below:
https://mycanon.usa.canon.com
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.