04-27-2023
09:18 AM
- last edited on
04-27-2023
10:32 AM
by
Danny
Greetings,
Just set up new TR 8620a.
Does the front "Operation Panel" need to be in open position to allow printing?
I would hope that it opens automatically but mine does not.
Thanks!
04-27-2023 09:38 AM
It is manually opened, and does need to be open for printer to work.
04-27-2023 09:00 PM
Thanks for your prompt answer John.
Poor design of Canon requiring the operation panel to remain open. A downgrade from my pixma MX882 which shut down due to full ink absorber, and is not supported according to Canon thus forced to buy a replacement. Oh well….
04-27-2023 09:29 PM
I am guessing the logic is that operating the printer locally requires seeing and using the LCD pad at reading it if it was vertical would be difficult.
04-28-2025 10:07 AM
Must be open. I just purchased this printer, and this is one stupid feature. Fortunately, I don't print a lot anymore, otherwise this printer would be returned. I mainly scan now.
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.