04-27-2023 09:18 AM - last edited on 04-27-2023 10:32 AM by Danny
Greetings,
Just set up new TR 8620a.
Does the front "Operation Panel" need to be in open position to allow printing?
I would hope that it opens automatically but mine does not.
Thanks!
04-27-2023 09:38 AM
It is manually opened, and does need to be open for printer to work.
04-27-2023 09:00 PM
Thanks for your prompt answer John.
Poor design of Canon requiring the operation panel to remain open. A downgrade from my pixma MX882 which shut down due to full ink absorber, and is not supported according to Canon thus forced to buy a replacement. Oh well….
04-27-2023 09:29 PM
I am guessing the logic is that operating the printer locally requires seeing and using the LCD pad at reading it if it was vertical would be difficult.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.