01-09-2016 12:18 PM
I've just installed Windows 10 and reinstalled the Canon MG5600 software and drivers for a MG5650 all in one device.
I can print fine and I can scan when using IJ SCAN or Windows Scan app.
Initally I was able to use the Scan button on the MG5650 to initiate a scan but after a reboot of the PC pressing Scan on the device resulted in "Please wait momentarily" and then returning to the Scan menu without starting anything on the PC.
Today I deleted the MG5650 in Control Panel / Devices & Printers and deinstalled all software. I then reinstalled the software and added the MG5650, printing and scanning all work OK, SCAN from the MG5650 worked.
Then rebooted PC and SCAN comes up with "Please wait momentarily" and never works.
I'm left with always having to use the IJ Scan utility rather than the functionality on the MG5650 which is a shame.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 188.8.131.52
PowerShot SX420 IS - Version 184.108.40.206
PowerShot 620 HS - Version 220.127.116.11
PowerShot SX720 HS - Version 18.104.22.168
PowerShot G1X Mark III - Version 22.214.171.124
PowerShot G7X Mark II - Version 126.96.36.199
PowerShot G9X Mark II - Version 188.8.131.52
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.