04-01-2023 03:33 PM
04-01-2023 07:27 PM
Support page is here: EOS 300D - Support - Download drivers, software and manuals - Canon Europe (canon-europe.com)
No drivers are required. If you are trying to connect camera to a computer via USB be sure the Communication setting is for PTP.
04-01-2023 09:55 PM
04-01-2023 04:01 PM
Wow! What a classic!
While our Forum Community members are welcome to chime in, the 300D was originally released in August, 2003 for the Canon UK market and has been retired. Once a product is retired, the official Canon support content (troubleshooting articles, user guides, how-to videos, etc.) may be removed from the Canon website. To take advantage of Canon's innovative technologies, consider reaching out to our Canon Upgrade Specialists at 1-800-443-8002.
We also found the following info on our Canon UK website:
This product is compatible with the operating systems listed below when connected to a computer via a USB cable the camera should be automatically detected as a media device. It is not required to install a driver.
For setting up a Wi-Fi connection please refer to the user manual of your product
This product is compatible with the following operating systems -
We hope this helps!
04-01-2023 07:27 PM
Support page is here: EOS 300D - Support - Download drivers, software and manuals - Canon Europe (canon-europe.com)
No drivers are required. If you are trying to connect camera to a computer via USB be sure the Communication setting is for PTP.
04-01-2023 09:55 PM
Thank you I see PTP is a Picture transfer protocol.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.