The day after a wedding (well over 1000 acceptable flashes) at a newborn got unwanted full power flashes with Speedlite set on ETTL and 1/3 power. Is the flash having a nervous breakdown?
Does anyone have any recommendations for a flash for a Rebel XTi? I was looking at the Speedlite 320ex or the 270EXII but don't have any experience with these flashes.
I'm disappointed with my speed light batteries,any of you please suggest me what is the best batteries to use for canon speed lights
Hi community!I am starting to experiment with off-camera lighting. The last thing I need to get started is an adapter to hold my 430 EXII onto my lightstand bracket. I'm seeing this referred to as a "cold shoe adapter". Does anybody know of a good on...
My 550EX is great paired with my 5DmIII but sometimes it doesn't recycle quickly enough. I am a wedding photographer and for the first dance I need to be able to shoot quickly. I'm generally shooting in ETTL if that matters. I always put fresh batter...
Does an ETTL splitter/cable exist that will allow me to control two different flash groups from my Canon 60D?
EOS Rebel XTi DSLR. Even with nothing else attached... Occasionally use a Bower Auto Focus add-on flash, model SFD35C.
I am using a cowboy studio transmitter & receiver. Manuals for the 430 & 5d both indicate highspeed sync will work with higher shutter speed. 430 is set to highspeed sync.
How can I set the FLASH exposure compensation from the CAMERA. It appears that I have to set the exposure compensation on the back of the flash unit. I would like be able to change the FLASH EC settings from the camera, not the flash unit.
Last night one of my 600 ex rts would switch from slave mode to regular mode during the shoot. They are all set to ttl, on camera master (a), slave (b). I would get a few shots then the slave would loose sync because it switched modes by itself. I ha...
While exploring wireless flash with my two 580 ex IIs, I noticed when I test-popped the master, there was a delay in the slave firing. This test was run while the master was not mounted on my camera and the slave's sensor was pointed in the direction...
Are there any benifits to using a speedlite vs. a third party flash? I have been thinking of getting a flash and wanted to know what the pros and cons to them are. Any help would be greatly appreciated. Thanks.
I would have thought this would be a common question but I can't find it in the manual or the forum: can you set the speedlite to continuous (or bulb) light? So use it as a simple continuous light source. Thanks for letting me know.
| Subject | Author | Posted |
|---|---|---|
| 10-27-2025 03:43 AM | ||
| 09-03-2025 09:35 AM | ||
| 08-31-2025 03:17 AM | ||
| 05-25-2025 01:33 PM |
New to the community? Here's some information to help you get acquainted:
11/20/2025: New firmware updates are available.
EOS R6 Mark III - Version 1.0.1
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
07/24/2025: New firmware updates are available.
07/23/2025: New firmware updates are available.
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.