Speedlite Flashes
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

430EXII Problems

Good morning!  I have the Speedlite 430EXII and a D60.  When I take off my Speelite my D60 thinks the Speedlite is still attached and the built-in flash will no longer pop.  I went into the menu settings and was told I could not make any changes beca...

Rebel XTi

Does anyone have any recommendations for a flash for a Rebel XTi? I was looking at the Speedlite 320ex or the 270EXII but don't have any experience with these flashes.

equipment advice

Hi community!I am starting to experiment with off-camera lighting. The last thing I need to get started is an adapter to hold my 430 EXII onto my lightstand bracket. I'm seeing this referred to as a "cold shoe adapter". Does anybody know of a good on...

Pozo by Contributor
  • 5639 Views
  • 5 replies
  • 0 likes

550 ex not recycling quickly enough

My 550EX is great paired with my 5DmIII but sometimes it doesn't recycle quickly enough. I am a wedding photographer and for the first dance I need to be able to shoot quickly. I'm generally shooting in ETTL if that matters. I always put fresh batter...

sw949 by Apprentice
  • 6513 Views
  • 7 replies
  • 0 likes

Resolved! 600EX Flash - 5D III. Flash exposure compensation.

How can I set the FLASH exposure compensation from the CAMERA. It appears that I have to set the exposure compensation on the back of the flash unit. I would like be able to change the FLASH EC settings from the camera, not the flash unit.

mkg by Contributor
  • 10814 Views
  • 9 replies
  • 0 likes

600ex-rt switching from slave to regular during shoot

Last night one of my 600 ex rts would switch from slave mode to regular mode during the shoot. They are all set to ttl, on camera master (a), slave (b). I would get a few shots then the slave would loose sync because it switched modes by itself. I ha...

Jumunter by Apprentice
  • 4946 Views
  • 2 replies
  • 0 likes

Resolved! Delay between master and slave 580 ex IIs

While exploring wireless flash with my two 580 ex IIs, I noticed when I test-popped the master, there was a delay in the slave firing. This test was run while the master was not mounted on my camera and the slave's sensor was pointed in the direction...

ksreid by Apprentice
  • 8018 Views
  • 3 replies
  • 0 likes

Speedlite vs. Third Party

Are there any benifits to using a speedlite vs. a third party flash? I have been thinking of getting a flash and wanted to know what the pros and cons to them are. Any help would be greatly appreciated. Thanks.

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements