Im looking to have a separate flash unit for my Rebel T3i purchased in 2012. My old Canon speedlight 300EZ was for my old 35mm. film Canon EOS 650 and is somewhat limited. I have a Phottix Strato II Multi Transmitter and Receiver set but I can't...
I have 6D and 40D and couple of days a go I started to have a problem with low exposure when I'm working on ETTL with my Speedlite 600EX-RT. On manual it gives full power, i can adjust the flash output but theres no changes on the power.I done reset ...
The red Pilot Light on my Canon 580 EX II started flashing after using it for a few flashes.
I have a Canon 580EXII flash that I assume I overheated.. It would turn on and everything on the screen would look fine, but it would not fire.... I sent the flash back to canon for repair and $120 later I got it back. It fires now but the flash seem...
I bought a used 580EXIIwich looked in excellent shape. Made a few test-shots, all seemed fine.Now the batteries that came with it have run out, I put in a set of rechargeable batteries. But the flash won't work with them. I tried another set, same th...
Any suggestions? It just shows ETTL M Zoom 14mm accross the top of the unit. This is with the 16-35mm lens or the 100mm macro lens. ??
I have a Canon 6D, I want to use 2 yongnuo speedlights wirelessly. I would like to use there 568II or 568III or 568ex. Not sure which ones to get. Also I need 1 transmitter and 2 receivers to make this work. What do you suggest?
Camera on Av (5DMiii) speedlite pointed up one click off vertical and bouce card ( came with camera) deployed.subject in shade so want to minimally illuminate face and have eyes bright. was on 2.8 with the 24-70 Canon lens.Shot several ; ETTL at stan...
I recently purchased a 70d and would like to know if my 550 ex speedlight will work on it until I can upgrade my flash unit.
Hello all,have bought the 100 macro is usm lens and the mr14 ex ring flash. Small problem is I need the adapter to mount the two. Can some one advise on the part number.Many thanks
What does it mean when the panel flashes off and on
The ETTL does not work great in low light conditions with stage lighting - I have actually tried using the ISO to boost the camera exposure and this seems to help but I've found moving down the stop also helps. any idea ?
Hi Forum - Anyone familiar with using a 60D with studio flash units - I am in manual mode shooting at F11 with a sync speed at 60 - using 2 studio flashes set at 1/4 - and getting very bright exposures - any internal settings I should be using for ...
I have a new 6D, and I am trying to do some 'test' portraits with my 580EX II. I'm using ETTL mode; and aperture priority. I was able to adjust exposure compensation when using my previous camera (1D3) but I can;t seem to be able to soften the intens...
