cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

my 580 will not recognize my canon L lenses on my eos 6d. Never had the problem before. Suggestion

jpharbour
Apprentice

Any suggestions?  It just shows ETTL          M Zoom          14mm      accross the top of the unit.  This is with the 16-35mm lens or the 100mm macro lens.  ??

3 REPLIES 3

TCampbell
Elite
I've loaned my 580EX II out to a friend so I can't pull up my speedlite... but offhand it looks like you've set it to "manual zoom" mode at 14mm.

The reflector behind the strobe electrically moves forward or backward to change the shape / concentration of the light spread. As you zoom a lens, the flash can automatically move the reflector in response (within the limits of travel).

But it is also possible to put the "zoom" of the flash head into manual mode and when you do this, then you have to control the the zoom setting (using the dial on the flash) manually.

Based on your description, it looks like this is what you have done.

Tim Campbell
5D III, 5D IV, 60Da

It's the plastic diffuser...  I have no idea what that thing is called.  The clear plastic piece that pulls out of the end to spread a wider coverage.  It's out, possibly just a tiny bit.  Pull it all the way out and put it in firmly.  Happens on occasion.

 

I believe the zoom only goes down to 24mm, the diffuser does something wide like 14mm and will flash that icon to let you know its out.

amfoto1
Whiz

Note that you do need to use that diffusion panel with the wide end of your 16-35mm... any focal length 23mm or wider... but not with the 24-35mm range of that zoom or with your 100mm macro lens.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.