When using external battery pack with the 600 EX RT you will get better performance from the internal AA’s in the flash if you set Custom Function #12 on the flash to “ 1 “.This will segregate the AA's from the recharge circuit when it is turned on....
My Speedlite 600EXll RT is giving me a sporadic after glow after a flash exposure has been taken. It does not happen all the time. Flash is set for ETTL and is only 2 1/2 months old. It is like, the flash goes off, that exposure is perfect and then a...
How do I fire the 430EX II and two 430EX III-RTs using my ST-E3-RT on my 80D?I can fire my RTs but want to figure out adding the 430EX.
Just treated myself to a 430 EXll RT as I want to use wireless flash for a particular job. However no matter what settings I use I cannot get my EOS 600D to fire the flash wirelessly. (flash unit set as wireless slave, channel on both flash and cam...
I have a 199A from my days with my AE-1. Both work! Can I use the 199A with my T2i?
I am having an issue with getting my Canon flashes to do exactly what I want. This is complicated by my not using them as intended. Equipment:Fuji XT-1 w/ FlashQ T1-S remote triggerCanon 580EX II w/ T1-S receiver, set as master unit mode manualCanon ...
Hi,I've never used add-on flash or speedlights with my cameras (a few beginner and intermediate level Canon DSLRs and now EOS R). But now I'm getting into People and Portraiture photography, so thought of getting a flash for my EOS R.I found a very g...
In menu, under flash control, I got to Wireless func.There are 4 choices. Im not sure what they mean.Disable. okLooks like the next gives an option of power difference between external and on camera flash.The next is not having the on camera flash at...
Hello, My Ring Lite Flash MR-14EX has no pilot light when switched on. I wondered if it had some settings that needed to be reset or cleared by attaching to camera, so connected it to my 70D. When first put on, the ETTL shows on the flash LCD but as ...
Hi.I have a Speedlite 600ESII-RT.I also have 4 AA Watson rechargeable batteries.I took out the flash after having not used it for a while. I wanted to check if the rechargeable batteries are ok because the charger led light was indicating something s...
Hi Just iused my canon eos 1300d and flash430ex11. When i took shots in automatic mode in darken area and after firing off some shotsi just was holding camera and flash would be firing a few flashes by itself. Dont know if this is normal or not.
Alright folks, I've read all the prior post and poured over the instruction manuals until I'm ready to scream. I just replaced the old 430's with new RT models and simply want to fire one flash in ETTL.Can someone please give me the simple version of...
I have several older Speedlite flashes was wondering if they will work on y EOS 800D I tried the 550ex but it did not seen to sync right any thought much appreciated
I've have never used slave mode on my speedlights. I always had a trigger for each one. But i'm playing with some weird mix and match setups and wanted to be sure of something. - can i get my 430exii to fire based only off a strobe firing? Thanks a l...
For some reason the flash is not working in ETTL mode. It will flash but the subjec/scene is still dark. All other modes work as should1. I changed cameras2. I changed batteries3. Reset/cleared the speedlite settings4. Reset the speedlite settings in...
| Subject | Author | Posted |
|---|---|---|
| 12-03-2024 09:33 PM | ||
| 08-28-2024 04:38 PM | ||
| 08-22-2024 10:18 PM | ||
| 08-10-2024 11:52 AM | ||
| 06-02-2024 05:55 PM |
New to the community? Here's some information to help you get acquainted:
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.
