Speedlite Flashes
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

st-e3-rt version 1 Upgrade to version 2

I heard you are able to upgrade your version 1 remote trigger to a version 2 but I can’t find anywhere on the website to do that. Can someone point me to the right direction? Thanks!

jcg432 by Apprentice
  • 1128 Views
  • 1 replies
  • 0 likes

Is there a way to factory reset 600EX-RT Speedlites?

Hey folks, I've been having continual problems with one of my three 600EX-RT Speedlites. Specifically that no matter what settings I change, it continues to not be correctly synced to the shutter of the camera. I was wondering if there was a way to d...

jourdak by Apprentice
  • 4179 Views
  • 2 replies
  • 0 likes

Resolved! 430ex iii-RT - Multiple flashes won't stay linked/synced

This problem has recently developed.  I use 9 430ex iii-rt's at the same time, one as a master and the others as slaves.  I use 4 on A and 4 on B and 1 for the master.  The master is set to the Manual mode.  All the units, slaves and masters are set ...

Yongnuo YN14EX II Macro Ring Flash

Does anyone out there own one of these? I give up on Yongnuo or B&H for an answer:This flash's control unit looks like a regular flash with a swivel head on it. Is the YN14EX II's "head" (the part where the cord is attached) swivellable? I don't why ...

1.JPG
normadel by Authority
  • 4338 Views
  • 9 replies
  • 0 likes

Yongnuo YN560 III Not Firing on EOS 800D

Hi Y'all.Some help please. I have a Canon 800D and a YongNuo YN560 III Speedlight. When it is OFF camera, it fires. When it is connected to the hotshoe it does not I'm in manual mode.I have tried with and without liveview.I have turned the speedlight...

Resolved! Speedlite 550EX Battery Recommendation

I use a Canon EOS 300D camera and have just bought a Speedlite 550EX flashlight. Looking at the instructions I read one should not use AA lithium batteries so I wondered just what batteries one should use. By the way, is there a Canon dedicated power...

BML by Contributor
  • 2520 Views
  • 2 replies
  • 0 likes

Resolved! Canon Speedlite 580 EXII will not fire on EOS R5

My flash won't fire when the shutter is activated in any mode. It DOES fire when I press the red button. I've also tried all the modes on the flash, I usually use ETTL.  Any suggestions?  Thanks in advance.

CORNED1 by Contributor
  • 4985 Views
  • 6 replies
  • 0 likes

Resolved! Speedlite 430EX II Left batteries in until they leaked!

I have a Canon EOS and a 300D Speedlight 430EX 111 which I left batteries the in until they leaked!I cleaned the Speedlight battery holder but whatever I do I can find no life. Its years since I used it and can't remember if it shows life when not co...

BML by Contributor
  • 6049 Views
  • 19 replies
  • 0 likes

Resolved! EL-1 not receiving Zoom coverage with 70mm-200mm

My understanding is that setting Zoom to "Auto" should change the Zoom setting depending on the Zoom setting of a Zoom lens. Unfortunately, this doesn't seem to work at all when used with my R5 + ST-E3-RT v2 and RF 70mm-200mm. It always shows 50mm no...

600EXii-RT Stopped Flashing

I have a 600EXii-RT problem that I can't figure out. I changed the batteries and now the unit powers on normally, but won't flash, even with the test button. I had been using it for a few hours prior to the battery change and it worked perfectly. No ...

Dakota59 by Contributor
  • 2776 Views
  • 11 replies
  • 0 likes

600ex-rt HELP!!!

So my Speedlite 600ex-rt turns on, changes modes and functions, communicates with the camera when on the hot shoe but will not fire when shutter is clicked nor will it fire when trying to test (pressing red light). Does this mean the bulb blew? The f...

pwald16 by Apprentice
  • 2191 Views
  • 3 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements