cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Windows 11 and CanoScan 9000F Mark II

DLI1228
Contributor

Ever since I downloaded Windows 11 this scanner stopped working.

Completely.

Cannot find a dedicated driver. 

Has this thing become a boat anchor?

3 ACCEPTED SOLUTIONS

BurnUnit
Whiz
Whiz

This sounds more like an issue with the "upgrade" to Windows 11. That is to say, Canon has done nothing in the way of making changes that would make the scanner inoperative. Perhaps Microsoft will offer an update that will allow Win 11 to recognize your scanner and make it functional.

View solution in original post

jrhoffman75
Legend
Legend

Look into VueScan by Hamrick Software.

John Hoffman
Conway, NH

1D X Mark III, M200, Many lenses, Pixma PRO-100, Pixma TR8620a, Lr Classic

View solution in original post

DLI1228
Contributor

Thanks to y'all who have provided support and helpful recent steps by Canon to make my scanner accessible for Windows 11. You are right that that these comments come some 2 years after my posting of woes. They come too late.  I dumped that Canon scanner as a boat anchor, removed all its software and acquired my present Brother scanner which was very reasonable in price and fits al my needs, which aren't many or fancy.  

I've had Canon cameras in the past that I have liked a lot (I now use a Nikon) so it's not the name I'm rejecting, it's the  mouth-breathing nerds in the windowless Canon facilities with green eyeshades and Birkenstocks  who released a scanner without Windows software and sat on it for two years/  Boo on them and their bosses.

View solution in original post

22 REPLIES 22

 

‎12-04-2023 11:20 AM

I am using NAPS2. You can find the software on the internet.
https://www.naps2.com/

WestCoastD
Apprentice

Hello Friends:

I have recently upgraded to Windows 11 Pro (64-bit). Are we supposed to just accept that Canon does not, or will not, provide an upgraded driver for this scanner? 

Are we supposed to just dump this scanner and purchase their latest product?

Appreciate any constructive input.

dave

 

jrhoffman75
Legend
Legend

89B3722E-4DAB-4937-8253-3E257E8A1797.jpeg

 Are you saying this driver doesn’t work?

John Hoffman
Conway, NH

1D X Mark III, M200, Many lenses, Pixma PRO-100, Pixma TR8620a, Lr Classic

Okay, thanks for your response. Maybe I was only viewing the CanoScan9000F Mk1 page, and NOT the Mk2 page?

I just went back to the CanoScan9000F, Mk2 drivers page and noticed there are Windows 11 specific drivers. I will install and test.

Also, which particular file should I install? Ver1.00 ? or Ver1.02 ? 

Dave

Feltipen
Apprentice

Hi, 

I came across this post with the same problem.
Canon gave me a fix which worked fully! see below
I emailed Canon from here (email link at the bottom of the page)
CanoScan CS9000F Support | Canon Australia
(or in text format https://www.canon.com.au/other-products/canoscan-cs9000f/support)
They responded quickly with:

Please be advised that upon checking our website, the driver and software is for windows 10 version only. We do not have driver and software for your CanoScan 9000F if you are using windows 11.

This is due to the age of the scanner, operating system requirements and other factors including design and features.

Just in case you are using windows 10 computer, you may refer to link below to download the Scanner Driver and MP Navigator. Kindly see link and setup instructions. Note: You may try this on your windows 11 computer, however there is no guarantee if it is going to work or not.

9000F Scanner Driver Ver. 16.0.5 (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP/2000)

???????https://pdisp01.c-wss.com/gdl/WWUFORedirectTarget.do?id=MDEwMDAwMjc3NTA0&cmp=ABS&lang=EN


MP Navigator EX Ver. 3.15 (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP/2000)

https://pdisp01.c-wss.com/gdl/WWUFORedirectTarget.do?id=MDIwMDAwMzk1MzAx&cmp=ABS&lang=EN

Setup Instructions
Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded EXE file to decompress it, then installation will start automatically.
3. Follow On-Screen Instructions.
???????

If you require further information or assistance please reply to this email or contact Canon on 13 13 83

The problem for me seemed to be 1. Windows doesn't let you update the driver manually, it thinks it has the best driver, so the exe file does that for you. 2. The advertised drivers/scangear and MP Navigator apps do not recognise the scanner, but the one in the link above does.

There was just one glitch, after installing the driver first, then the Navigator app, the scanner had to be turned off and on again to get it to work after an error code came up. But all is working fine.

I hope it works for everyone

DLI1228
Contributor

I've been using Windows 11 for many months and tried over and over to get Canon to let this scanner work with it. All to no avail, despite frequents requests. So I dumped this Canon boat anchor and bought an inexpensive Brother model that works fine. I'll never buy another Canon product again. Boo on them.

 

I am using NAPS2. You can find the software on the internet.
https://www.naps2.com/
I hope you haven't thrown away your scanner. Cannon quality is good.

sorry to hear that, cant see the point in posting through? The drivers and the scangear program are working just fine with the links above on Win11 64 bit

Jaffacake67
Apprentice

Canon do still make Win 11 drivers for the Canon 9000F Mk2

-

https://www.usa.canon.com/support/p/canoscan-9000f-mark-ii

 

Canon do not make Win 11 drivers for the Canon 9000F Mk1

I am using NAPS2. You can find the software on the internet.
https://www.naps2.com/
I hope you haven't thrown away your scanner. Cannon quality is good.

 
Avatar
Announcements