Control C70 on a jib or crane
Im looking the best way to control my C70 while it is on a jib. How do i control the camera wirelessly other than using the Browser Remote?
Posts
Resolved! Trouble saving camera settings from C300 mkii
Hi all, I am trying to save my camera settings to the SD card. The card is not locked, have tried different sized cards (32, 64) and still the option is greyed out under format as well as under the transfer menu.Any thoughts? Have tried in 3 differe...
Canon C300 MK III audio hiss when recording
Hello,Wondering if someone can help me with this, I recently bought a used Canon C300 MK III and it works fine but the audio hiss levels are off the charts. It seems like I can't record past mark 5 on mic/+48 and even at mark 5 the level of hiss is u...
Resolved! EOS C70 Locating RAW files on SD card and exporting them to XF Utility
Hello,I have taken some footage on the c70 using the raw lt setting. I am not sure where it lives on the SD card. I can view the the footage when the sd is in camera, naturally, but when I connect to computer and open XF utility, I see only my non-ra...
Resolved! EOS R5C micro-HDMI suddenly stopped working
I've had my R5C for less than 4 months and my micro HDMI port is no longer sending signal to my monitor/s. There are zero signs of damage to the connector. I even looked at it under a loupe. No bent pins or anything. USB-C above it works fine but...
Canon C200 proper exposure in RAW with WFM, Proper IRE for 18% gray
HiConcerns: Canon C200 proper exposure in RAW with WFMSome DOPs like Rubidium say: expose an 18% gray card at 42IRE when preset at C-log3 because this is what the canon papers recommend for C-Log2 and since RAW is recorded in C-Log2 in this camera...
How do I change the start of the file names on a XA40
I have two of this camera that I use at the same time and I really need to make one have a different file prefix than the other so I can save the videos to the same folder. The entire 4th page of the "Recording Setup" menu is grayed out and un-select...
What is the correct IRE value of 18% grey for Rec709?
Clog2 correct exposure puts middle grey at 407/39.8%. the canon default clog2 to rec709 lut still puts middle grey at 407/39.8%, which makes the image look dark. if I move middle grey to 512/50%, the image looks too bright and washed out. so what is ...
Resolved! Canon R5C Autofocus box disappeared from video mode and will not return
I cannot for the life of me figure out how to bring the box back up. I used a Xeen 35mm EF with the rf adapter for a shoot, then when I switched back to a 24-105mm RF lens, the focus box was gone. I've tried to change a million settings and cannot fi...
How to embed Canon VB-M46's rtsp url with account and password
Hi everyone,I just bought Canon VB-M46 one month ago. Thankfully, everything functioned smoothly. However, when I want to use the camera with my Python app by OpenCV library, I met one major problem regarding connection. Here is the detail:- I want t...
Resolved! HJ22eX7.6 IASE Lens Manual
Could someone point me in the right direction to find a user manual. I have been all over the site which seems to just keep sending me is a loop or rabbit hole. Getting info on broadcast lenses is like getting info out of the government.Yes the produ...
Can not access ipv4 address on Canon CR-N300
We have manually setup an IPV4 address on the camera and additionally disabled IPV6. All computers and cameras are on the same subnet. We can ping the IPV4 ip address just fine. When trying to access the camera via the IPV4 IP address in a web browse...
Resolved! XA50 Using an External Mic With Camera's Handle Removed
I am trying to use my XA50 without the top handle and plug a mini shotgun mic with an 1/8 phono plug into the mic IN jack by the lens. I want the top handle off to reduce the camera profile for my B-roll camera, but have a safety audio source by usin...
External Monitors compatible with C300 MIII
Hi all - I'm looking to buy an external monitor that is compatible with my Canon C300 MIII and would love your advice. For those who have a Canon C300 MIII and an external monitor, which do you use? What should I be looking out for specification wise...
Resolved! EOS R5 C 120 fps
For the canon r5c I’m trying to shoot in 120 frames per second. i see the option to where you can shoot in 60 frames per second. Only other setting I see is slow and fast motion but I don’t really understand how that works
