cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

EOS R5 C Vertical Video Comes Out Sideways

jboogy50082
Contributor

When I try to shoot video by turning the camera vertical the video comes out side ways when viewing on the computer. Is there a reason why it’s happening like that? other canera when I record vertically I’m able to view the video vertically on the computer 

1 ACCEPTED SOLUTION

I saw in the menus that there is a way to rotate the video to portrait orientation as the person stated above.But uploading the media still comes out side ways. To fix the problem I have to rotate the video in editing software 90 degree.when I did research I found that certain file formats will export in portrait when viewing on the computer

View solution in original post

4 REPLIES 4

Greetings,

Is this what you are looking for?

shadowsports_0-1668436470474.png

If not, I'll have to try and reproduce recording something in portrait orientation.

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It

Waddizzle
Legend

@jboogy50082 wrote:

When I try to shoot video by turning the camera vertical the video comes out side ways when viewing on the computer. Is there a reason why it’s happening like that? other canera when I record vertically I’m able to view the video vertically on the computer 



It is my understanding that there is a setting within the R5c menus that allow you to capture video with the camera rotated to a portrait orientation.

I am curious, though.  What other cameras allow you to shoot in a portrait orientation?

--------------------------------------------------------
"The right mouse button is your friend."

I have a Fuji X-S10 and the Canon R5 C. Using the Fuji, imported video is automatically displayed as portrait when shot in that orientation. Not so in the R5 C. I'm also looking for a solution.

I saw in the menus that there is a way to rotate the video to portrait orientation as the person stated above.But uploading the media still comes out side ways. To fix the problem I have to rotate the video in editing software 90 degree.when I did research I found that certain file formats will export in portrait when viewing on the computer

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.