05-17-2022 06:47 PM
I have followed all the instructions to toggle through to the Monitor menu and select OFF for OSD (On Screen Display) but that still leaves STBY or REC on screen, which is shared on our SDI feed.
05-18-2022 07:56 PM
Turning off the OSD Output setting on the camera should be all you need to do for a clean HDMI or SDI output.
Just to double check is the issue that you are still seeing STBY and REC on the built in EOS C200 screen, or is it showing on your connected SDI monitor? If it is still showing on the built in EOS C200 monitor that is okay. The OSD Output setting only applies to the outputs HDMI and SDI outputs to an external monitor. That setting does not turn off the onscreen displays on the built in monitor.
05-18-2022 07:58 PM
Thank you! Unfortunately that is a bug with the C200 and SDI output, it wasn't made for a clean feed. I spent half an hour yesterday on the phone with a technician at Canon who was experimenting with a monitor on his end and he saw that as well. I'm hoping they can provide a fix. Thank you much for your time, Hazel!
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.