03-16-2014 11:23 AM
Pixma Pro-100 new. Can not get Black to show up on test print. Have tried cleaning & deep cleaning over and over. Also print head alignment has been done. Seems like black ink cartridge is clogged. Any suggestioins other than purchasing a new ink cartridge?
03-16-2014 12:30 PM
You may want to read this thread. <---click me.
03-16-2014 12:32 PM
Thank you ebiggs1. I read that earlier this morning and did everything EXCEPT the Q-tip cleaning step. Finally with nothing to loose I tried some warm water on a Q-tip and the black is now working!! Just printed a B&W and a Color print and they look great! Some further calibrations and all will be good.
Thanks again for the suggestions.
04-09-2016 01:18 PM
I did the deep cleaning a number of times. Was not successful. Turned the printer off and left it overnight. Deep cleaned 2 times the next day My printer is now printing again
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.