Showing results for 
Show  only  | Search instead for 
Did you mean: 

imagePROGRAF PRO-1000 Avoiding AirPrint Installation


I have a Canon Pro-1000 setup as a network printer. I'm trying to install it on a Macbook Pro M1 running Ventura, and every single time it installs as Airprint. On previous machines I've been able to choose network install that is NOT airprint, but on this one I cannot figure out how to choose another option. How do I force this to not be airprint during installation?



While I don't have the Pro-1000 I have other Canon printers.

I have observed that it can take a while (sometimes several minutes) for the Canon IJ Series driver to appear when adding a printer.

If that fails you could give Canon a call at 1-800-OK-CANON for assistance.

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic


It appears, but then at no point is there an option to choose anything. Once installed, it says "air print" was installed. I do remember before I could choose in the process, but now there's no option,. 

Screenshot 2023-05-20 at 12.27.50 PM.png

 After this, click add, and it's added as air print. No choice. 

The IJ Series isn’t on the list. Bonjour is AirPrint. 
I can’t explain why it’s not appearing if you downloaded and installed the Canon CUPS driver. Canon should be able to assist. 

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

My printer is WiFi connected, you can see that it says "Canon"

Screenshot 2023-05-20 at 3.35.28 PM.png

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

thanks so much. I get it now. I see. For some reason I'm not getting the IP option on the Canon at all with Ventura. But you pointed me in the right direction. That may be the root of other issues with PSP as well. I'll work on it. 

Screenshot 2023-05-20 at 2.15.38 PM.pngScreenshot 2023-05-20 at 2.09.47 PM.png

 Could well be related to the PSP issues. PSP works with the Canon driver. 

You can see that there is a Bonjour and native version driver for your Epson printers. 

John Hoffman
Conway, NH

1D X Mark III, Many lenses, Pixma PRO-100, Pixma TR8620a, LR Classic

I forced an IP installation. I have the router set for a fixed IP on all the printers. It installed. It no longer says "bonjour", but after reinstalling PSP nothing has changed. I can print directly from PS and it works through my RIP. 

Sometimes we like PSP though. It's a nice to have but we'll deal without it. Thanks for all your help. I have other little things to iron out now as I make upgrades. 

The following should work.  After the CUPS driver is installed, open printers and scanners.  Remove the Pro-1000 (minus) -, then add (+), select the Globe and re-add as an IP printer.  Enter the IP address and use the drop down to select the previously installed CUPS driver.  

Bay Area - CA

~R5 C ( ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10

~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It
08/18/2023: Canon EOS R5 C training series is released.

07/31/2023: New firmware updates are available.

CR-N700 - Version 1.2.0

CR-N500 - Version 1.3.0

CR-N300 - Version 1.3.0

CR-X300 - Version 1.1.0

06/30/2023: New firmware version is available for EOS-R5 C

05/31/2023: New firmware updates are available.

EOS R6 Mark II - Version 1.1.2

EOS R6 - Version 1.8.2

EOS R7 - Version 1.3.1

05/18/2023: New firmware updates are available.

EOS Rebel T100 - Version 1.1.0

EOS Rebel T7 - Version 1.2.0

EOS 5D Mark IV - Version 1.4.0

EOS 6D Mark II - Version 1.2.0

PowerShot Elph 360HS - Version

PowerShot SX420 IS - Version

PowerShot 620 HS - Version

PowerShot SX720 HS - Version

PowerShot G1X Mark III - Version

PowerShot G7X Mark II - Version

PowerShot G9X Mark II - Version


04/20/2023: New firmware version 1.4.1 is available for EOS R3

03/30/2023: New firmware updates are available.

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10

02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5