Professional Photo Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Print Studio Pro not working

It looks that Print Studio Pro does not work with HP Pavilion g9 hp Pavilion g6Model: g6 - 1205AXAMD Radeon Dual GraphicsWin 7/64Lightroom 4 and 5Photoshop Elements 10 and 11Canon Pixma Pro-100 Effords to open Print Studio Pro lead to error message  ...

Error.jpg PSP.jpg
otava by Enthusiast
  • 4541 Views
  • 1 replies
  • 0 likes

Rich Blacks

When offset printing brochures we've often used a double black technique to get very rich blacks.  Is there an equivalent process that can be used with Canon Pixma inkjet printers and with the Pro-100, or Pro-10 in particular.  Please provide details...

Joel by Apprentice
  • 4257 Views
  • 3 replies
  • 0 likes

Pixma Pro-100 custom print size

On the Pixma Pro-100. Why is the maximum height that I can print when I select a custom size only 23" when 26" is supposed to be the maximum available via the drop down selector?I get the following message:: "The media type and paper size are not set...

Tom_K by Apprentice
  • 4506 Views
  • 0 replies
  • 0 likes

Print Studio Pro

My Print Studio Pro stopped working on all applications (PSE and LR). It opens OK, but the selected image does not show up nor does any of the selection values like paper size show. Only the headlines appear? Thanks

otava by Enthusiast
  • 6562 Views
  • 15 replies
  • 0 likes

Canon Pixma Pro 100 setup

Hi,I recently purchased Pixma Pro 100 printer. I followed the instructions to setup the printer but it is not working. It is throwing Canon 5100 error.I am pretty sure I followed the written instructions correctly but wanted to double check. I went t...

sbhas1 by Apprentice
  • 4109 Views
  • 1 replies
  • 0 likes

Resolved! Dull prints with Pro-100

Earlier this week, I purchased a Pixma Pro-100 to replace my i9900 printer.  My primary motivation was to be able to print faster, as I have been very satisfied with the quality of the prints the i9900 produced. Yesterday, after I installed the Pro-1...

Pro-100 Custom Printer Profiles

Has anyone had success in using a custom printer profile with this printer. Glossy generic Canon paper profiles work ok but are not completely on the money. I get a little too much red. I had a custom profiles created by reputable 3rd party provider ...

General Resolution Value in Photoshop

I just was told that the Pro-100 should generally be set to a resolution of 300 in Adobe Photoshop for printing.  Notice the key word here, "generally."  Not looking to spark a debate on "if-this" or "if-that" regarding the hundreds of possible circu...

DarylGS by Apprentice
  • 3116 Views
  • 1 replies
  • 0 likes

SHEET CLEANING, ix7000

To avoid what I just went through, check to see if you already have the cleaning sheets. They apparently came with my printer and are located in an obscure drawer. Pull out the bottom paper tray, turn the tray so the right side is facing you. Look fo...

katbrain by Apprentice
  • 4945 Views
  • 0 replies
  • 1 likes

PixmaPro9000 is misbehaving

Dear people,My PixmaPro9000 is misbehaving. All ink cartridges are installed, full according to the printer driver, and in the correct order, with airholes uncovered. The printer previously printed photos fine, but has been rarely used for a couple o...

jcn by Apprentice
  • 3426 Views
  • 3 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.