06-12-2021 12:09 PM
I am getting a 1206 (Maintenance Cover Open) error code each time I turn on my Canon Pro-1000. The maintenance door is NOTY OPEN nor is the maintenance cartridge full or not locked in position. None the less I have replaced the maintenance tank - did not clear the issue.
I have opened the locking tab above the maintenance cartridge - did not clear the issue.
I have held the door covering the maintenance cartridge closed - did not clear the issue.
I have powered the unit down and even removed the power cable, and after 1 minute reattached the power cable and turned the printer on - did not clear the issue.
Has anyone had similar problems and how did you restore printer operations.
I can't clear the error message nor progress past it to print my documents or photo images
All suggestions are helpful so long as I can restore functionality.
My printer is scarcely three years old
06-13-2021 08:13 AM
Welcome to the forum.
This is not a specific Pro-1000 recommendation, but sometimes disconnecting a power cable and then pressing the power on button drains any retained power. It works on my PC and iMac. Can't hurt to try.
06-25-2021 11:43 AM
Called Canon Tech support hoping to get a repair authorization or be provided a fix to the problem. No such luck. Apparently, Canon operates on an if it fails, we'll give you 10% off a new unit philosophy making my having kept the original packing container a waste of space. They, Canon, did give me a 10% discount on a NEW Pro-1000 and suggested I dispose of the inoperable unit despite the only fault being a door switch.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.