cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon MG 2522 Driver will not complete installation

mycello1
Apprentice

The driver fails to complete the printer connection on my Lenovo Ideapad 5 Pro. I have tried both of the steps in the manual to correct this - first unplugging and turning off the printer, and then restarting the computer and retrying the instillation from the beginning. Neither method has worked. What can I try next?

1 ACCEPTED SOLUTION

Patrick
Product Expert
Product Expert

Hi mycello1,

Reinstalling will resolve this issue. To do this, please follow these steps:

1. Press the Windows key on your keyboard and the letter R, then let both go.

2. In the Run window, please type CONTROL PANEL and click OK.

3. Click on View devices and printers (or Devices and printers, depending on your view).

4. Right click the Canon MG2500 series and left click on Remove device. Repeat until all MG25000's are removed.

5. Disconnect the USB cable.

6. Click Close to close that window.

7. In the upper left corner, click on Control Panel (or the Back button).

8. In Control Panel, click on Uninstall a program (or Programs and features, depending on your view).

9. Click once on "Canon MG2500 series MP Drivers" and then click Uninstall at the top.

10. Follow the on screen prompts to uninstall the driver. When you click Complete, the driver is uninstalled.

11. Once done, please reboot your computer.

When your computer restarts, we will reinstall:

1. Please use the following link:

https://www.usa.canon.com/internet/portal/us/home/support/details/printers/support-inkjet-printer/mg...

2. Click the Select button next to "MG2522/MG2525 MP Drivers Ver.1.02 (Windows)".

3. Click the Download button. The drivers will download.

4. Once the download is complete, open your downloads folder. To access this, press CTRL and J, then let both go.

5. Double click "mp68-win-mg2500-1_02-ejs.exe" to begin the installation.

6. Follow the on screen prompts to reinstall, reconnecting the USB cable when prompted by the installation.

Once the installation has completed, please attempt to print.

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

3 REPLIES 3

Patrick
Product Expert
Product Expert

Hi mycello1,

Reinstalling will resolve this issue. To do this, please follow these steps:

1. Press the Windows key on your keyboard and the letter R, then let both go.

2. In the Run window, please type CONTROL PANEL and click OK.

3. Click on View devices and printers (or Devices and printers, depending on your view).

4. Right click the Canon MG2500 series and left click on Remove device. Repeat until all MG25000's are removed.

5. Disconnect the USB cable.

6. Click Close to close that window.

7. In the upper left corner, click on Control Panel (or the Back button).

8. In Control Panel, click on Uninstall a program (or Programs and features, depending on your view).

9. Click once on "Canon MG2500 series MP Drivers" and then click Uninstall at the top.

10. Follow the on screen prompts to uninstall the driver. When you click Complete, the driver is uninstalled.

11. Once done, please reboot your computer.

When your computer restarts, we will reinstall:

1. Please use the following link:

https://www.usa.canon.com/internet/portal/us/home/support/details/printers/support-inkjet-printer/mg...

2. Click the Select button next to "MG2522/MG2525 MP Drivers Ver.1.02 (Windows)".

3. Click the Download button. The drivers will download.

4. Once the download is complete, open your downloads folder. To access this, press CTRL and J, then let both go.

5. Double click "mp68-win-mg2500-1_02-ejs.exe" to begin the installation.

6. Follow the on screen prompts to reinstall, reconnecting the USB cable when prompted by the installation.

Once the installation has completed, please attempt to print.

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Thank you so much! That worked, and I can use my printer now. I am so grateful.

Tried that -several times - no joy.  I have O/S-11, new HP computer.  The Install  "mp68-win-mg2500-1_02-ejs.exe" runs and detects the computer and goes to install,  then after about 5-8 minutes the can't detect the printer appears and Install fails.  "Settings" "Devices" does not see the printer, but does see the MG2522 Scanner!  

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!