Point & Shoot Digital Cameras
cancel
Showing results for 
Search instead for 
Did you mean: 

Posts

G5X MK2 light meter

Is there any mode wherin I can point the camera at the subject and get a meter reading that includes aperture and shutter speed so I can work from there? Thanks in advance.

G7X Mark III Autofocus Issues!!

Hi all,I recently “upgraded” from the G7X mk 2 to the mk 3 and have noticed that the new camera seems to struggle with autofocus when shooting video.I’m pretty new to digital cameras in general but am using my experience with the mark 2 as a referenc...

G7X Mark II missing screw for the screen

Recently on my canon g7x Mark II I lost a screw that holds my screen in place. I contacted Canon and they said they won’t send me a new screw I would have to send my camera in same with all local shops. Any idea where I can get this screw????

Resolved! powershot sx540 confusion

Hi, my first question in this forum is related to sx540 which became my second after sx600 canon camera just a couple weeks ago. As much as I like the quality of AUTO shots in comparing to the AUTO in my previous camera, the same much is my confusion...

SX530 HS No WIFI Connection To PC

HI all, Just got my 530.Trying to set it up to connect to a networked (wired) PC.Ran the Canon wifi setup.The camera connects to my wirelss access point ok then searches.It found my PC once and I did the setup.Now it never finds it or connects to it....

Slow motion in current models?

Hello Canon, Is slow motion video available in any of the current Canon digital cameras? Specifically the point and shoot models? I often used that feature in my older ELPH 300 and 320 HS cameras, but as I was browsing the specs for a new replacement...

DanB by Apprentice
  • 877 Views
  • 1 replies
  • 0 likes

Resolved! Can we please talk about resolution?

I have a SX60HS and a SX50HS.   My work occasionally requires a photograph for an article.  This week I am really l-o-s-t as I took shots with both cameras on the "highest settling".    The image size in .jpeg was about 2300kb. The editor wants at le...

xwingz2 by Contributor
  • 1484 Views
  • 6 replies
  • 0 likes

Auto release on Powershot SX530 HD?

Discovered this is available by jumping through several computer hoops and working through my Android phone. Has anyone done this with this camera or similar model? Would be good to set a camera on a tripod, focus and shoot humminbirds on a rest or f...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available forRF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!