cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon G7 X Mark II disconnected message

Sonofdel50
Apprentice

Hi All,  This is frustrating me and i cant seem to find out why it is happening.

I am trying to connect my canon g7 x mark II to my windows 11 pc wirelessly.  I can connect USB no problem.  I have followed all the instructions and it still does not connect.  The camera finds my pc by name but when it tries to connect, after about 30 seconds it just says disconnected.  Its not my antivirus as i have disabled it while i try and solve the issue.  I have tried reinstalling software, updating drivers, Rebooting my pc and nothing works.

 

Any help would be massively appreciated thanks 🙂

1 ACCEPTED SOLUTION

Windows 10 uses the “Image Transfer Utility”, not Camera Window.  Windows 11 seems to be supported for DPP4, but not Image Transfer, Canon Connect, or EOS Utility

https://www.usa.canon.com/internet/portal/us/home/support/details/cameras/point-and-shoot-digital-ca... 

--------------------------------------------------------
"The right mouse button is your friend."

View solution in original post

4 REPLIES 4

Waddizzle
Legend

What app is running on the PC?  

--------------------------------------------------------
"The right mouse button is your friend."

i am not sure what you mean ??  if you mean what software to connect to the camera i am just using canon camera window.  Do i need certain software for my pc to recognize the camera??  Camera window just says 'no camera detected'  

Windows 10 uses the “Image Transfer Utility”, not Camera Window.  Windows 11 seems to be supported for DPP4, but not Image Transfer, Canon Connect, or EOS Utility

https://www.usa.canon.com/internet/portal/us/home/support/details/cameras/point-and-shoot-digital-ca... 

--------------------------------------------------------
"The right mouse button is your friend."

Thanks for your help.  I guess i will just have to wait until there is a way to connect wirelessly to my windows 11 pc 🙂

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!