cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MF641CW Printer - Are these noises normal when printing?

nsouth
Apprentice

Our printer makes loud sounds before and after printing. Is this normal? Here's a video of the printer finishing a 5-page print job. The printer finishes and stays on for another 50-ish seconds, occasionally making loud flapping/clunking sounds. It makes these same sounds before printing, too. I'm new to MFPs and am wondering is this is normal. Thanks!

 

4 REPLIES 4

Chickadee
Apprentice

My printer makes that noise after a job or when I turn my machine on sometimes too. I always assumed it was an auto-cleaning function 😬

Greetings,

That does not sound normal to me. Something sounds loose. Is the paper tray mostly full? Are you using Canon brand 054 toner?

~Rick
Bay Area - CA


~R5 C (1.0.2.1) ~RF Trinity, ~RF 100~400, +Canon Control Ring

~6D2 (v1.1.1) Retiring ~EF Trinity, others ~DxO PhotoLab Elite ~Windows10/11 Pro ~EVGA RTX 3080Ti FTW3 Ultra ~ImageClass MF644Cdw ~Pixel6 ~CarePaks Are Worth It

Hector
Product Expert
Product Expert

Hello Nsouth,

You can try reseating the toner an reloading the paper to see if the printer stops making so much noise. You can reload the toner using the steps in the link HERE and check for any packing material. if that does not resolve the issue, you can try reloading the paper using the steps in the link HERE. When loading the paper, make sure the paper does not go past the paper fill line shown in step 3.

If you continue to have problems, I would suggest contacting support over the phone at 1-800-652-2666. Our agents would be happy to assist checking the issue and can provide any available service options..

nsouth
Apprentice

Thanks for the responses, all. I have tried reloading the toner and the paper is nowhere near the limit line. However, the sounds persist. I've added some photos below. It looks like our black toner is Canon brand, but the colored toner is 3rd party.

I don't know it's related, but it looks like there's a mess from the yellow toner. It looks like it's spilled onto some of the internal mechanisms. Sorry to sound ignorant, but how big of a deal is that?

20221129_175431.jpg20221129_175303.jpg20221129_175856.jpg

20221129_180401.jpg20221129_180351.jpg20221129_180345.jpg20221129_180411.jpg

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.