cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MF641CW Printer - Are these noises normal when printing?

nsouth
Apprentice

Our printer makes loud sounds before and after printing. Is this normal? Here's a video of the printer finishing a 5-page print job. The printer finishes and stays on for another 50-ish seconds, occasionally making loud flapping/clunking sounds. It makes these same sounds before printing, too. I'm new to MFPs and am wondering is this is normal. Thanks!

 

4 REPLIES 4

Chickadee
Apprentice

My printer makes that noise after a job or when I turn my machine on sometimes too. I always assumed it was an auto-cleaning function 😬

shadowsports
Legend
Legend

Greetings,

That does not sound normal to me. Something sounds loose. Is the paper tray mostly full? Are you using Canon brand 054 toner?

~Rick
Bay Area - CA


~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It

Hector
Product Expert
Product Expert

Hello Nsouth,

You can try reseating the toner an reloading the paper to see if the printer stops making so much noise. You can reload the toner using the steps in the link HERE and check for any packing material. if that does not resolve the issue, you can try reloading the paper using the steps in the link HERE. When loading the paper, make sure the paper does not go past the paper fill line shown in step 3.

If you continue to have problems, I would suggest contacting support over the phone at 1-800-652-2666. Our agents would be happy to assist checking the issue and can provide any available service options..

nsouth
Apprentice

Thanks for the responses, all. I have tried reloading the toner and the paper is nowhere near the limit line. However, the sounds persist. I've added some photos below. It looks like our black toner is Canon brand, but the colored toner is 3rd party.

I don't know it's related, but it looks like there's a mess from the yellow toner. It looks like it's spilled onto some of the internal mechanisms. Sorry to sound ignorant, but how big of a deal is that?

20221129_175431.jpg20221129_175303.jpg20221129_175856.jpg

20221129_180401.jpg20221129_180351.jpg20221129_180345.jpg20221129_180411.jpg

Avatar
Announcements