05-14-2019 03:19 AM
I have an MF 4570dn. When I print a document directly, the copy is fine but when I photocopy it, it prints very, very light.
The cartridges are fine.
Any idea(s)?
05-16-2019 12:25 PM
Hi SFSGM.
It is recommended that you adjust the density and image quality settings for the copying function. You may need to adjust the image quality settings until you get the quality that you prefer. Please follow the instructions at the link below to adjust these settings:
If you continue to experience an issue, please call us at 1-800-OK-CANON (652-2666), Monday - Friday 10:00 a.m. to 6:30 p.m. ET (excluding holidays).
05-16-2019 04:02 PM
I tried that before without any luck. Could it somehow be the fuser?
It just seems odd that if I print, say, and emailed document the density is fine but if I then try to copy that documents it's extremely light.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.