01-10-2023 06:12 PM
My Canon MF731 prints beautifully and copies beautifully. When I open the Canon MF Scan Utility application and press scan "document," I get an error message "Cannot communicate with any of the scanners. The scanners may not be connected, or may be turned off."
My mac is ios 12.5 and I have installed the latest Canon drivers for 10.12-13.1. Any suggestions?
01-13-2023 08:46 AM
I’m watching your post because the same thing is happening with my TR 4520.
02-01-2023 02:52 PM
Hello Jtpsweeny,
The issue could be caused by a connection issues, settings in the utility or security blocking the connection. You can check the top of the MF scan utility to make sure the printer is set to the correct connection MF731 vs MF731 (network). We would be happy to assist with the issue. To provide some feedback or some troubleshooting steps, we would need some additional information. If you could reply to this message with the information below, we can provide some assistance.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.