09-02-2016 01:46 PM
I get all the display ranges I want, but no photo. There are shots on the card. they are fine on the computer. is there an easy fix?
09-02-2016 02:16 PM
What exactly are "display ranges"?
Are saying that you can take pictures, seemingly just fine, but when you try to play them back on the camera, you see no photo, but you can see photo information? However, the photos appear just fine on your computer?
09-02-2016 03:05 PM
I cannot see the photo I have just taken nor see any in view shots. I also cannot see live shoot.
09-02-2016 03:06 PM
But I do see them on the computer, so the card works.
09-02-2016 03:23 PM - edited 09-02-2016 03:24 PM
@yooperme wrote:But I do see them on the computer, so the card works.
Does the LCD display anything? Can you see the menus? It sounds like your camera may be in need of service, if you cannot see menus. Make sure nothing is plugged into the camera's HDMI port.
09-02-2016 04:17 PM
Check that your eyecup isn't displaced upwards a little. There is a sensor above the eyecup that shuts off LCD when camera is against face.
09-02-2016 04:26 PM
09-02-2016 04:41 PM
Have you tried cycling the INFO button
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.