EOS DSLR & Mirrorless Cameras
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

40D not triggering 430EX II but data works

Hi! I've got a 400D, 40D and a Speedlite 430EX II.The flash works just fine with my 400D but not with the 40D. 40D detects it and I can even change settings from my camera (and can see that they change on the flash). However, it just won't flash. I'v...

Warranty on Repair

How long is the warranty after a repair? I am unable to locate my receipt, and my EOS DLSR has again stopped working. I think it has been about 4 months since the repair. Thanks in advance!

LisaN by Apprentice
  • 3145 Views
  • 4 replies
  • 0 likes

Rebel t3i Flash output settings

I have a new rebel t3i when i set the flash to manual the flash output  level for the built in flash will not go higher than 1/4 power. it will go lower down to 1/128 power but not higher than 1/4. I contacted canon and they replied back that they do...

plow by Contributor
  • 2047 Views
  • 1 replies
  • 0 likes

Resolved! T3i to 1-D Mark ii a smart buy?

I am considering upgrading from my Rebel T3i to a 1-D Mark ii, but I wanted to get some feedback as to whether or not that's a worthwhile upgrade. In case it matters, I would classify myself as an advanced amateur, and a semi-professional. The photo ...

Markfinn by Contributor
  • 6174 Views
  • 21 replies
  • 0 likes

adapter ac-e6 is not working

I own an EOS 5d markii. I don't use much except travel time. I purchased an original Canon 8v adapter (ac-e6) when I purchased the camera several years ago. I used once and it did work then. Now it doesn't. I want to use the camera in video. I got ma...

levon by Apprentice
  • 2698 Views
  • 1 replies
  • 0 likes

5D3 Firmware Hiccups: The Open Closed LiveView

Hi, There are enough things to improve in Canon EOS 5D Mark III (5D3 for short), things which we hope (one can dream...) that will be improved in the next firmware update coming in April. (one can dream - again...) Well, it is known that nowadays the...

JohnTh by Contributor
  • 3123 Views
  • 2 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements