EOS DSLR & Mirrorless Cameras
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Resolved! EOS 90D Display Data

First off, whoever started the forum and deleted the phone number for help needs to be put in an ant hill with honey smeared all over them. What a pain the ass!!!Yesterday I was shooting my 90D when the information on the back window went blank. It w...

LeeAnn11 by Apprentice
  • 335 Views
  • 3 replies
  • 0 likes

Using EOS M50 Mark II as a Webcam

Hey community!I ordered M50 mark 2 and I was hoping, that I can use it with my mac as webcam. So far I am not able to do that. I installed EOS Webcam UtilityRestarted MacInstalled EOS Utility 3 Updated firmware to 1.0.3 versionSymptoms: After connect...

cervik_ by Apprentice
  • 759 Views
  • 5 replies
  • 0 likes

6D won’t read SD card- anyone replaced?

Hi Everyone! I had an SD card break in the card slot. I got it out but now it won’t read any card. I took it to a camera place who said none of the pins are bent but suggested that I send it to canon for repair. Has anyone had this issue before? I’m ...

iruma77 by Apprentice
  • 393 Views
  • 3 replies
  • 0 likes

Canon M200 lens not responding

When I push and hold the lens switch in the up arrow direction and then rotate the lens to enable shooting as instructed on the screen, the message does not go away. It does not allow me to engage the shutter button. I've tried another lens to test a...

sMa007 by Apprentice
  • 207 Views
  • 1 replies
  • 0 likes

Canon Rebel T7 stopped working as webcam

I have happily used the Canon Eos Rebel T7 as a webcam for the past two years. A few weeks ago, all of a sudden it stopped. It still works fine as a camera on itself, but I dont seem to be able to connect to my computer anymore. Its not showing as an...

ZS by Contributor
  • 695 Views
  • 18 replies
  • 0 likes

Canon 90D will not focus nor take pictures

I was at an air show and was using my D90 and was on Manual mode. I was using a 70-200iii along with the extender. I was shooting in high speed. This was the second day doing this. The Blue Angels were flying and I just kept clicking. The camera then...

Jet Close and clear sm.jpg
gunnycc by Contributor
  • 724 Views
  • 10 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.