EOS DSLR & Mirrorless Cameras
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

EOS R6 Mark II Rattles when turned off

Just bought camera and when off components rattle loudly at the easiest tilt. I’ve read it’s IBIS. It quiets down once turned on but still hear it.I’ve read the 6 has noise but doesn’t sound like a broken cheap toy like the mark2. May I get some feed...

KK2023 by Apprentice
  • 6943 Views
  • 10 replies
  • 1 likes

Resolved! C Log and 10 Bit on Canon Eos R50

Why can't Canon SELL US Clog 3 and 10 bit for EOS R50 owners? No way I'm buying a new R50v. They did this to us with the M50 when they made the M50 mark 2 Could have EASILY just sold us a firmware uopdate! I want the clog and 10 bit and I'm willing t...

Resolved! EOS R7 Downloaded images are awful

EOS R7 with a RF100-500mm lens in FV mode I have been using this camera and  lens for about 6 months and was getting along swimmingly with it. Today for some strange reason everything went wrong. It was a bright day and I was photographing insects. I...

Resolved! Setting streaming size for EOS R50 V

Hi there,The help docs for the EOS R50 V suggest that you can set the streaming size when using USB (UVC/UAC) Streaming. However whenever I start the connection and plug in the USB-C cable to my Macbook Pro M series, I get a warning that streaming is...

monitus by Apprentice
  • 2304 Views
  • 4 replies
  • 0 likes

Resolved! Canon 1000D : ERR 01 message with 70-300 lens

I got a different lens for my camera and on some settings, (usually full auto mode)  I get an "err 01" communications between the camera and lens is faulty, clean the lens contacts",but other shots / settings it works perfect. camera is Canon 1000d a...

moon1.jpg

Resolved! EOS R - Switching to Aperture Priority

Hello:  I was given a Canon EOS R camera.   I'm trying to get it to Aperture Priority.  The instruction manual indicates that I should press the "Mode" button, and then select Aperture Priority.  Whenever I press the Mode button, all I get is "Focus ...

eapples by Contributor
  • 1056 Views
  • 2 replies
  • 0 likes

Canon 1DX Mk III losing date/time

My Canon 1Dx MkIII has started losing date/time. It stays for a day or two then loses it. My batteries are all in good shape. My firmware is updated to latest Ver1.9.0. I have even reset the camera to factory. Any idea why this is happening? Thanks. 

Canon 6D door switch/trigger repair

Good evening, I recently discovered that my Canon 6D Mark I doesn't turn on. I charged my battery fully, there was an SD card inside and still it would not turn on. I bought new batteries, charged them and still, nothing. I took the camera to a camer...

jburge by Apprentice
  • 528 Views
  • 1 replies
  • 0 likes

EOS 1300D Lithium Cell Specs

Hi, I purchased a dead 1300D . The issue was the internal cell battery on the power board. I’ve cleaned the corrosion, repaired the damage and some other issues. The camera is like new and inside and out. My issue is what is the cell battery ? I have...

Getting started

New to the community? Here's some information to help you get acquainted:

Announcements