10-22-2022 08:55 PM
With an RF lens on my R5 I get a confirming focus beep if I focus the lens manually, however I do not get a confirming focus beep when using a non-RF lens such as a TS-E lens on my R5 via an adapter. Is there a way of getting a confirming focus bleep with a non-RF lens using an adapter?
10-24-2022 04:55 PM
I capture pano shots quite often. You really should not have to refocus for each panoramic capture, not unless you are focus stacking for increased DoF with a telephoto lens.
05-19-2023 07:11 AM
Hi Everyone!
I found that you can enable 'Focus guide' in the AF menu Number 2. That will show a small focus square which you can move as if it were the AF focus point. It will turn green when you hit focus, but won't beep.
At least a good aid tool, that works perfect. I'm using a, EF mount Carl Zeiss Distagon ZE lens, with the Canon Adapter EF-EOS R.
Hope this helps!
Best,
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.