cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Mark IV processing slowly

RobinS1
Apprentice

I just started using the 5D Mark IV.  It processes too slowly, giving me a BUSY message, taking more than 3 sec. to process!  I also can not shoot in bursts.  Am I missing a setting that does not allow me to process quickly?  My 5Ds is amazinginly fast and I can easily shoot in bursts.  What I am doing wrong?

1 ACCEPTED SOLUTION
18 REPLIES 18

kvbarkley
VIP

Is DLO on?

RobinS1
Apprentice
Sorry, what is DLO?

Thank you!  That was the problem!  I always make lense corrections in DPP, but didn't realize it the Mk4's default settings left  the DLO on...works perfectly now!

Hi, i have a query. 

 

I have disabled DLO and Dual Pixel RAW, but i get only 12 images to click with high speed continuous mode while shooting birds or wildlife.

 

Is there any way that this count can be increased? 

i also upgraded my memory card to 300mbps write speed. 

 

Kindly help me on this.

What are you shooting, that sounds about right for RAW+JPEG.

 

Otherwise, do you have an aggressive noise reduction on?


@raghuviju wrote:

Hi, i have a query. 

 

I have disabled DLO and Dual Pixel RAW, but i get only 12 images to click with high speed continuous mode while shooting birds or wildlife.

 

Is there any way that this count can be increased? 

i also upgraded my memory card to 300mbps write speed. 

 

Kindly help me on this.


Does it totally stop at 12 or does it just pause a few frames then do 12 more?


@RobinS1 wrote:
Sorry, what is DLO?

Digital Lens Optimizer.

 

If you shoot in RAW, you don't need it, because you can apply it in post-processing.

 

And the only compelling reason that I've found to shoot JPEG is to get the picture to a newspaper in a hurry. Believe me when I tell you that photo reproduction in newspapers isn't nearly good enough to have it make a particle of difference whether DLO is used.

Bob
Philadelphia, Pennsylvania USA

Thank you so much...this was the fix I needed!  I appreciate your help!

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.