02-02-2021 05:04 AM
My previous Canon DSLR was a 40D (which I absolutely loved). It's been a long time coming, but I recently upgraded to a 5D Mark III. The one thing that is driving me crazy about this new camera is the shutter button. On my 40D, there was a discernable detent at half shutter. This is where I would lock focus and recompose, if necessary. The 5D Mark III does not seem to have this detent at all. I can half press, but I have to hold my finger in place with nothing to rest on before pushing down all the way to take the photo.
Is this how they were made, or is my shutter button just worn out, or am I just using this camera wrong?
02-02-2021 06:32 AM
02-02-2021 07:58 AM
I have both a 40D and 5D Mk III right now and I see no difference in the shutter button half press or full press functions.
On the 5D Mk III the AF-ON button on the back of the camera is always enabled by default. There are custom functions which change the way the both the shutter button nd AF-ON button works.
You must either have a custom function enabled, or your shutter button is not working properly.
02-02-2021 11:50 AM
I have neither of those bodies, but two different Canon DSLRs.
Both have a noticable "stop" when pressing the shutter button to meter an focus. Additional force is required to depress fully to actuate the shutter.
Sounds like your 5D shutter button may be defective if you don't feel that "stop" effect.
02-02-2021 12:02 PM
The 5D Mk III is a wonderful camera. It is certainly worth sending to Canon for a C&C. I would do the rest and when that doesn't help call Canon for the C&C. 1 (800) 652-2666
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 184.108.40.206
PowerShot SX420 IS - Version 220.127.116.11
PowerShot 620 HS - Version 18.104.22.168
PowerShot SX720 HS - Version 22.214.171.124
PowerShot G1X Mark III - Version 126.96.36.199
PowerShot G7X Mark II - Version 188.8.131.52
PowerShot G9X Mark II - Version 184.108.40.206
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.