02-20-2024 01:46 PM
Hey guys, I have used the R5 for dozens of weddings, but this past Saturday, my ISO continuously changed even though I was shooting in Manual Mode. This is the first time this has ever happened.
Also, myself and my 2nd shooter were BOTH using 2 different R5 cameras and were both receiving the ER 70 error.
Any ideas on what in the world is going on? The wedding on Saturday was ROUGH because of these problems!
Thanks for your help!
02-20-2024 02:03 PM
At the risk of asking a silly question. Are you shooting in Auto ISO while the camera is in M mode?
02-20-2024 03:28 PM
Yes! I have looked in both places already.
02-20-2024 03:31 PM
Thanks for your response, but I'm not sure what that means. If you are shooting in Auto ISO, that will continue even in M mode.
02-20-2024 03:37 PM - edited 02-20-2024 03:38 PM
I am NOT shooting in Auto ISO! For instance, I am shooting in Manual Mode with 1600 ISO and then it continues to change on me on its own. I am shooting the same way I have been shooting since I got the camera and this has never been an issue.
02-20-2024 03:39 PM
Thank you for clarifying that and while I appreciate your are frustrated, please realize I am trying to clarify the facts and your response of Yes! to answer my question could be interpreted that you are in fact, shooting in Auto ISO.
02-20-2024 09:23 PM
shayscala1107,
I guess I would have 4 questions:
1) When you say the ISO changes, does it consistently go in one direction?
Does it always go up, or does it always go down, or does it fluctuate?
2) Have you tried setting a different ISO, like ISO 800, and does the same thing happen?
3) Is the lighting different from shot to shot when you see this behavior?
4) Do you by any chance have a maximum ISO set in your menu?
As far as the Err 70 goes, I'll leave that to people who know more about those things.
Steve Thomas
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.