EF & RF Lenses
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Sigma 24-70 f/2.8 DG lens giving Err 01 on Canon R5

Hello! I just picked up a used Sigma 24-70 f/2.8 DG OS lens (the newest 24-70 version, 2019 I think?) and it works just fine on manual focus, but the AF is not working. It was giving me an Err 01 code, and so I researched and found that the most comm...

EF-S 17-55mm f/2.8 does not zoom out with zoom ring

I prepare better quality photo gear for sale for the local thrift store that supports our non-profit hospice and have a bag of Canon crop lens gear on my bench. I'm a Canon full frame DSLR owner with a bag of L lenses, so very familiar with normal op...

dave_n_s by Contributor
  • 4022 Views
  • 7 replies
  • 0 likes

RF 100-500 black spot

I am getting a black spot on the right side of my photos when using my RF 100-500 at high fstop.  Any ideas?  If I take it down to f22 or lower it seems to go away.  I get the same result with R1 and R6 Mark II.The attached photo was shot at ISO 5000...

TB3A0480.JPG

EF 70-200 2.8L IS II USM End of service life notice

I got this from CPS yesterday. Info for the ones of us that have this lens. "Your EF 70-200 2.8L IS II USM will no longer be eligible for service after 6/30/2025. In appreciation of your continued loyalty, our expert sales team is standing by to help...

ebiggs1 by Legend
  • 5158 Views
  • 6 replies
  • 12 likes

Customizable Image Stabilization for RF Lenses

I own a C80 which I love, but I do not like the RF lens stabilization for video.  Plain and simple: RF lens stabilization is too jerky.  This applies to all of the RF lenses I've used so far which include the 24-70mm f/2.8 L IS, 70-200mm f/2.8 L IS, ...

AF noise with the 24-70 EF

I have a 24-70 f/2.8 EF lens on my C70 Cinema camera using a Canon EOS EF - RF adapter. The autofocus causes substantial noise. But when I put the lens and adapter on my R10, there’s no noise at all. The research I’ve done thus far suggests the adapt...

Qstorm by Apprentice
  • 2918 Views
  • 4 replies
  • 0 likes

Resolved! RF 200-800 Lens Design Issue - Filter can't be used with hood

A friend of mine was lucky enough to have received her Canon RF 200-800mm lens that she had ordered in Nov. 2023.  She has encountered an issue with the lens design.   The new lens does not appear to allow use of a filter while the lens hood is in pl...

MadJack70 by Contributor
  • 58587 Views
  • 44 replies
  • 1 likes

Registration of RF-S14-30/4-6.3 IS STM PZ

Wasted over an hour trying to register this lens.  It can't be found under either individual or kit.  I can find the lens itself, and I can find product support, etc.  I just can't register the thing.  Canon has the absolutely worst registration page...

EF300mm F/2.8 II concerns about service ending in 2028

I'm thinking about buying a EF 300mm lense but I recently saw that service dates are expected to end in 2028. Would anyone have any concern about buying one because of this? I think these are well built and maybe independent shops could service them ...

timp200 by Apprentice
  • 2736 Views
  • 3 replies
  • 0 likes

Resolved! Canon EF 70-200mm f/2.8L IS II USM will not shoot at 200mm

I have a EF 70-200mm f/2.8L IS II USM lens that I purchased used.  I use it on a 5D Mark IV.  I have noticed that it is a bit soft and looked into making some adjustments, with the help of Reikan FoCal Pro.  In doing so, I saw that the lens was repor...

RF 70-200mm F2.8L IS USM Z stuck at F8 in video mode on R3

Hello Everyone,I'm hoping someone can lend a hand or some advice. I have a new RF 70-200mm F2.8L IS USM Z that works flawlessly in photo/stills mode. However, when I switch to video, I can't change the aperture from F8 and it's locked down in the tou...

JayHawkJ by Apprentice
  • 4435 Views
  • 7 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements