cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

code 9,230,0

bvjr63
Contributor

Need a driver. Cannot scan.

2 ACCEPTED SOLUTIONS

Hi bvjr63,

 

The driver is available for download from Canon's web site.  Please follow these steps:

 

1. Visit Canon's website at: http://usa.canon.com/support

 

2. Type PIXMA MX922 in the "Enter a Model Name" box and click the Get Drivers & Downloads button.

 

3. Under Recommended Downloads, please click the "Select" button next to the MX920 Mini Master Setup.

 

4. If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".

 

5. Click the Download button.

 

6. When the Save As box comes up, click Save.

 

7. Once the download is complete, open your Downloads folder.

 

8. Double click [mast-win-mx920-1_0-ucd.exe]. Files will extract.

 

9. Once that window goes away, connect the USB cable from the PIXMA MX922 to the computer.

Installation will complete.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

View solution in original post

Hi I followed your directions to a tee! I made it to the part where the little download is up. It has been sitting doing nothing for a day and half.  Saying the download shouild take two minutes!

View solution in original post

11 REPLIES 11

Tara_N
Enthusiast

Hi, bvjr63!


To ensure the most accurate information is provided, we will need to know the printer model you are using.

Any other details you'd like to give will only help the Community better understand your issue!

If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).

Thanks and have a great day!

bvjr63
Contributor
Pixma MX920 printer. Windows XP.

Hi bvjr63,

 

The driver is available for download from Canon's web site.  Please follow these steps:

 

1. Visit Canon's website at: http://usa.canon.com/support

 

2. Type PIXMA MX922 in the "Enter a Model Name" box and click the Get Drivers & Downloads button.

 

3. Under Recommended Downloads, please click the "Select" button next to the MX920 Mini Master Setup.

 

4. If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".

 

5. Click the Download button.

 

6. When the Save As box comes up, click Save.

 

7. Once the download is complete, open your Downloads folder.

 

8. Double click [mast-win-mx920-1_0-ucd.exe]. Files will extract.

 

9. Once that window goes away, connect the USB cable from the PIXMA MX922 to the computer.

Installation will complete.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hi I followed your directions to a tee! I made it to the part where the little download is up. It has been sitting doing nothing for a day and half.  Saying the download shouild take two minutes!

Ok, let's try just downloading the drivers only. 

 

  1. Click HERE.

  2. Scroll down to ""Drivers" next to Recommended Downloads."

  3. Click “Select” next to "MX920 series MP Drivers."

  4. Agree to the Terms of Service by clicking the checkbox.

  5. Press "Download."

  6. Open and run the file.

  7. Follow the onscreen instructions to complete the installation.

 

This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have been trying to get it full of **bleep** problem solved for over 1 zillion times and NEVER SUCCESSFULLY AT ALL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

jeffreydellis
Apprentice

I already installed via online and STILL GET FULL OF **bleep** PROBLEM AT ALL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

jeffreydellis
Apprentice

I also got error messages: code 11.230.0

Hi jeffreydellis,

 

If you have any antivirus or firewall programs installed on your computer, please temporarily disable them and then attempt to scan again, as these programs can sometimes prevent the scanning process from completing successfully.

 

You will also want to ensure that any port information used by the printer and its associated software are not blocked.  To do this, please check the ports shown here.

 

Should you still experience difficulty, we ask that you please contact a Canon technical support representative here for further assistance. A representative will be happy to assist you free of charge.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.