Ink absorber almost full error code 1700 on my PIXMA TS8220

[BABYRAY]

Error message on printer "Ink absorber almost full"

How do I resolve? When printing pages do not come out clearly

[shadowsports · Accepted solution]

This error indicates your printer will need factory service soon or will need to be replaced. 

Press the RESUME/CANCEL button to clear the error (1700) https://share.google/wwEChpFOFmieNmMPU

You cannot bypass this error indefinitely.  Eventually the printer will need to be serviced or replaced.  

[DerrickL · Accepted solution]

Understanding Error Code 1700

What Does Error Code 1700 Mean?

Error code 1700 on your PIXMA TS8220 indicates that the ink absorber is almost full. This is a common maintenance issue in Canon printers, particularly after extended use.

Causes of Error Code 1700

The error typically arises due to:

• Accumulation of waste ink during print head cleaning cycles.
• Maintenance cleans and startup procedures.
• Frequent use of the printer without proper maintenance.

Resolving Error Code 1700

Steps to Fix the Issue

To resolve the error, you may need to clean or replace the ink absorber pads. Here’s how:

1. Disconnect the Printer: Unplug the printer and turn it off.

2. Locate the Ink Absorber Pads: Open the cartridge compartment to find the pads beneath the cartridge assembly.

3. Remove the Pads: Carefully take out the pads, which may contain waste ink.

4. Clean the Pads: Rinse the pads in warm water until the water runs mostly clear. This may require several rinses.

5. Dry the Pads: Allow the pads to dry completely, which can take several hours.

6. Reinstall the Pads: Once dry, place the pads back into the printer.

7. Reset the Printer: Turn the printer back on and check if the error persists.

When to Seek Professional Help

If the error continues after cleaning, it may be necessary to contact a Canon service center for further assistance or to replace the ink absorber pads.