Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

printer insists on printing to a file

For the last two weeks, the printer driver refuses to print. To clarify: It wants to "print" to a file. Canon tech support has advised me to uninstall and reinstall the drivers, which I've done several times, to no avail. This is incredibly frustrati...

pfeldman by Contributor
  • 4304 Views
  • 2 replies
  • 0 likes

Print from iPad - Upper Cartridge wants paper?

Trying to print a simple pdf doc using AirPrint. It should print in 8.5x11 standard size, but the printer keeps giving an error and wants me to load the upper cassette with paper. Not sure why, it can't fit the paper size I want to print with?Odd. He...

Print Preview is pixelated.

My MP560 has always given clear, accurate previews . Now they are all pixelated. The printouts are ok . This problem exists on both my Win 8 and XP PC'S. They share the same printer. Any ideas? Thanks Ron

theweav by Contributor
  • 4567 Views
  • 1 replies
  • 0 likes

MX922

I am trying to print from and email sent to me that was scanned as a picture though its a document. The printer keep defaulting to use the upper cassette and it ask to fill the cassette with paper but the document sent is in regular size 8x11 paper. ...

Cannon Image Gateway

I am a new registered member of Cannon. I have registered my PIXMA MX439 Printer/Multifunction product. After doing that, I tried logging into the Cannon Image Gateway, but it is not letting me. What am I doing wrong?

CRNolan by Apprentice
  • 5341 Views
  • 1 replies
  • 0 likes

Resolved! CLI-251XL Ink Longevity (drying up)?

Hi, all!  I'm new to this forum (as you can see). Background for my question: I'm very new to inkjet printers - all of my printers have been, and are, lasers except for one.  That one is a dedicated disk printer that uses a Lexmark engine and ink car...

MX870 not recognizing new printhead

I just ordered and received a new Canon printhead for my MX870 printer. After I inserted in the new printhead (and ink cartridges), I get error message B200. If I go back and put in the old printhead, the printer turns on with no error. Do I have to ...

sf22 by Apprentice
  • 4550 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.