Printing from an iPad Pro
Are there drivers for a PIXMA MG3220 printer for an iPad Pro?
Are there drivers for a PIXMA MG3220 printer for an iPad Pro?
Over the past several months, my printer (PIXMA MG5220) has been giving, apparently false, printer jam indications with increasing frequency. They occur when trying to print 5x7 photos or 4x6 photos from the rear paper tray although printing 8x10 or...
I am about to give up. I have updated the firmware, I have unplugged everything, and restarted over and over. When i turn it on, it makes a sound like something is trying to move and then stops and the error message appears. I pull out the paper tr...
Canon MG7760 error code 2,156,50 Control panel states 'Printer Ready' but unit won't scan. Any ideas?
Our MG5420 is no longer printing using at least one of the black cartridges but is unaware that there is a problemand just prints blank for that part of the image. I've tried nozzle cleanings, replacement headers, severalink cartridge replacements. I...
Hi, I wanted t o use my printer today and it's not working well. It doesn't print or copy, it showed me the error code 5100. I've followed the turotials given to clean the clear strip, read messages from previous discussions on how to fix it and not...
I turn off the printer and it still keeps coming on.
I'm getting this message on my printer (MG7120), but have no idea what it means.
Whenever I try to print something I get this message:unexpected configuration problem 0x8007007e How do I fix this?
How do I fix this issue? I have an mx512 and need to scan from my computer.
Pixma Printer TS6120 "Support Code 5011" "Printer error has occurred. Follow the steps below.1. Cancel printing, then turn the device off.2. Turn the device on again. If problem persists, see the manual and contact the serice center.Well...New printe...
My Pixma MX892, which I would guess is a little over a year old, has suddenly stopped working. I was able to print just two days ago, but now the unit will not turn on at all. Yes it is plugged in and yes the cord is connected to the unit. It simp...
I have a Canon MX350 that's attached by USB (Wifi isn't an option in my case), and when it's attached, an extra drive letter appears. It's not connected to the USB port on the printer, because inserting a flash drive doesn't make it appear as the dri...
I just installed a new PIXMA TS5100 printer. It seems to be missing the paper output support that keeps the printed pages from falling on the floor. Has anyone else experienced this item missing? How do you go about getting another one? TIA
I have an MG8120B that is giving "Ink Abosorber is Almost Full" messages. I have cleaned the absorbers but need to reset the counter to clear the error. How do I do this? (Note that this printer does not have a physical button for "Pause/Stop".) ...
Subject | Author | Posted |
---|---|---|
05-23-2025 08:19 PM | ||
05-23-2025 06:28 PM | ||
05-23-2025 05:26 PM | ||
05-17-2025 12:09 AM | ||
04-28-2025 06:52 PM |
New to the community? Here's some information to help you get acquainted:
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.