Desktop Inkjet Printers
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Posts

Resolved! MX472 Scans are always skewed at an angle

My feeder document scans always come out skewed with the right side higher than the left in the output image.  The left and right margins are straight, so I'm thinking that if the device is scanning right-to-left, the firmware isn't compensating corr...

tmgirvin by Apprentice
  • 511 Views
  • 3 replies
  • 0 likes

Canon G4210 Printer Jam

The paper in the tray enters the printer at a slant and jams ever so slightly.  I have done a roller cleaning and updated the printer/firmware.  I'm out of ideas, and the printer is only 1 year old!  HELP!  

zidlej by Apprentice
  • 322 Views
  • 1 replies
  • 0 likes

Print driver installation

I downloaded the print driver installation for a MG2520 printer to my computer and plugged the printer into my computer.  The installation started but then I got a message that the printer was not being found.  The instructions told me to disconnect ...

Ip6700 OK button and arrows not working

The OK button has stopped working on my IP6700. For a while it didn't matter. But now my prints are looking horrible despite deep cleaning via the computer. I would really like to access the controls on the printer.  The other buttons, like print/ st...

Resolved! Pixma MG3550 printing fuzzy after paper jam

Hi. My usually reliable PIXMA MG3550 had a paper jam for some reason. I opened the back to get the paper out,  now everything I print is coming out double exposure but only in places. I've aligned the print heads, updated drivers and checked out the ...

Pixma iP4700 Horizontal Alignment Problem

I like my iP4700. I use heavy cardstock in the vertical rear tray and it still works fine.I am having problems with the horizontal alignment of lines and text when printing landscape format tables and spreadsheets on ordinary 20 lb printer paper. As ...

IMG_5943_Sel_iP4700_Alignment_011722.jpg

Resolved! Pixma MX870_6A80 'Printer Error has Occurred'...

Printer has been working for years, and today after completing a print request... error 6A80. From a previous solution I read,"told of a 'switch" mechanism (Small white plastic) at the far right where the printhead docks, that can get clogged/gummed ...

Kwmck by Apprentice
  • 718 Views
  • 1 replies
  • 0 likes

Resolved! Pixma pi8720

I am on a new Dell computer, running windows 11 and I cannot get this printer to complete installation. It gets to the point of detecting the printer and detects it initially then says it's not detected. I have power cycled and tried different USB po...

ix6820 wont print black

I have a canon ix 6820. The larger black link stopped working. I removed the print head and flushed it out. This has worked for me in the past. I then ordered a new print head. I swapped ink cartridges and still nothing. I ran multiple cleaning optio...

g7020

is there a way to have my printer turn on from my PC  once i Hit the print button 

rhfsaf by Apprentice
  • 235 Views
  • 1 replies
  • 0 likes
Getting started

New to the community? Here's some information to help you get acquainted:

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!