cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Pixma TR8620 operation panel

rms59
Apprentice

The printer only operates with the operation panel pulled up until it's horizontal which really bugs me to no end and I'm still thinking of returning it for that reason. On the bottom of the panel there is a small plastic lever which operates a small switch that changes state depending on the position of the panel. When the panel is down the switch is in state 'A' and when it's up (horizontal) the switch is in state 'B'.

 

What would happen if I prevented the switch from changing to state 'A'. Would the printer still work? The reason I ask is that I would have to modify with a Xacto knife.

4 REPLIES 4

Patrick
Product Expert
Product Expert

Hi rms59,

 

You are correct, the operation panel must be opened in order to print with your PIXMA TR8620.

 

Making modifications to switches inside of the PIXMA TR8620 is not supported.

 

 

 

 

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

debmae2021
Apprentice

i am trying to set up a new tr8620. I keep getting support code 1240.  How do i open the Operation panel? Where is it? I need a visual HELP

It isn’t intuitively obvious.  I don’t like this feature.  Like my prior Canon MX922 Better. 

debmae2021
Apprentice

I actually figured out my problem by reading about the horizontal issue.  Thanks

Announcements
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
10/14/2022: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
09/19/2022: New firmware version 1.0.4.1 is available for EOS C70
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!