Showing results for 
Show  only  | Search instead for 
Did you mean: 

MP Navigator and High Sierra


After installing macOS 10.13.1 (High Sierra) MP Navigator EX 4.0 has ceased to work.


Thanks, Mark.  In the elegance stakes, that solution scores zero, I'm afraid!  Fortunately, by updating MP Navigator to v4.0.5 and reinstalling the IJ Network Tool in its latest version, all problems with my MG 6150 have been overcome.  Took me a couple of hours to sort that out and I would have hoped for an auto-update from Canon, to be honest, but the job's done, thankfully.  Hopefully this might help other sufferers.

View solution in original post

243 REPLIES 243

Just attempted it with MX870. It downloads and installs but alerts that it won't work with this printer.

This worked for me too (MG8150).

Get rid of all previous first.


Thanks - I spotted this earlier and wondered if it was safe - but yes it works for my MG8150. The same site has downloads for other printer/scanners so worth checking out. Why it can't be auto-available world-wide is beyond me - and all of us I guess!



Thanks, I tried it, but it didn't work for me.  My printer, a MP620B, is not supported. 

THANK YOU VERY MUCH Mr alvaromartinez!!!

Your post helped me.

I have a MG8150 and it is running under High Sierra now 🙂 🙂

All, worthwile looking at alvaromartinez's post !!


Had the same issue with PIXMA MG8120. The canon-asia update worked for me (I'm in USA). Thanks very much.

The Asia support update link you provided worked flawlessly!  My MG6120 is back up and running perfectly on my macOS 13.1 operating system. Thank you! Smiley Happy

Canon-usa please explain why you can't communicate, coordinate, cooperate with your brethren at canon-asia to copy, link to, reference the Asian version of MP Navigator EX for the USA market, where you sold the printer models that need that updated version. Don't you want to maintain good relations with your past USA customers?

this worked for my MG6120!




but why  is it on the Asia site and not the rest of the world?


This worked perfectly!  I'm using a PIXMA MG8210 and have OSX High Sierra.  Many thanks to the OP.  I can't believe Canon isn't just making software available worldwide.

08/18/2023: Canon EOS R5 C training series is released.

07/31/2023: New firmware updates are available.

CR-N700 - Version 1.2.0

CR-N500 - Version 1.3.0

CR-N300 - Version 1.3.0

CR-X300 - Version 1.1.0

06/30/2023: New firmware version is available for EOS-R5 C

05/31/2023: New firmware updates are available.

EOS R6 Mark II - Version 1.1.2

EOS R6 - Version 1.8.2

EOS R7 - Version 1.3.1

05/18/2023: New firmware updates are available.

EOS Rebel T100 - Version 1.1.0

EOS Rebel T7 - Version 1.2.0

EOS 5D Mark IV - Version 1.4.0

EOS 6D Mark II - Version 1.2.0

PowerShot Elph 360HS - Version

PowerShot SX420 IS - Version

PowerShot 620 HS - Version

PowerShot SX720 HS - Version

PowerShot G1X Mark III - Version

PowerShot G7X Mark II - Version

PowerShot G9X Mark II - Version


04/20/2023: New firmware version 1.4.1 is available for EOS R3

03/30/2023: New firmware updates are available.

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10

02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5