cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

ip8720 problem

fullyladenswall
Apprentice

Greetings-

 

New purchase- 8720. When trying to print a 6x4 envelope (custom size), the envelope passes through w/o printing the address and ejects the envelope. I tried feeding a 8.5x11 sheet to see what would happen and it it prints a partial adress at the bottom of the sheet. I believe I have set the parameters up in the user defined area correctly and then saved the settings as a custom preset. I have also uninstalled and reloaded the appropriate driver twice. Any thoughts, please?

Screen grabs below.

 

Thanks

 

Screen Shot 2017-11-27 at 9.04.57 PM.png

 

Screen Shot 2017-11-27 at 9.20.17 PM.png

1 ACCEPTED SOLUTION

fullyladenswall
Apprentice

Ha! Just figured it out! I guess the 6X4 (width feed) rotation doesn't work like it did on my Pixma10. I needed to rotate the image and envelope 1/4 turn for it to work....learn somethin' new every day.

 

Thanks, the fire's out!

View solution in original post

1 REPLY 1

fullyladenswall
Apprentice

Ha! Just figured it out! I guess the 6X4 (width feed) rotation doesn't work like it did on my Pixma10. I needed to rotate the image and envelope 1/4 turn for it to work....learn somethin' new every day.

 

Thanks, the fire's out!

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.