cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MP Navigator and High Sierra

Mike12
Contributor

After installing macOS 10.13.1 (High Sierra) MP Navigator EX 4.0 has ceased to work.

1 ACCEPTED SOLUTION

Thanks, Mark.  In the elegance stakes, that solution scores zero, I'm afraid!  Fortunately, by updating MP Navigator to v4.0.5 and reinstalling the IJ Network Tool in its latest version, all problems with my MG 6150 have been overcome.  Took me a couple of hours to sort that out and I would have hoped for an auto-update from Canon, to be honest, but the job's done, thankfully.  Hopefully this might help other sufferers.

View solution in original post

243 REPLIES 243

Jenine
Rising Star

Hello Mike12!

Welcome to the Canon Forums and thanks for your post!

To have a better understanding of your issue, please let everyone know what printer you are using. That way, the community will be able to assist you with suggestions appropriate for your product.

Any other details you'd like to give will only help the Community better understand your issue!

If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at usa.canon.com/support or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT). If you are not in the US, please go to www.canon.com and choose your region for contact information. 

Thanks!

MP640R

Canon scanner is a "CanoScanner LIDE210"

 

I send to the printer (Brother HL-3075CW) when I need to print, but mainly I save to the MacBook Air, and airdrop to another to another device that I use instead of paper copies.

 

Thank you

Leigh

My printer is MX860

I have the very same issue, I have Pixma MX882. When will there a fix?

Same problem MP620

MP Navigator 2.1 for Pixma MX320 no longer works with Mac OS High Sierra. New software is not available for OS 10.13.2. I cannot scan without it!!!!

Go back a couple of pages and catch up.  There are some solutions out there.  Best solution is find a version of MP Navigator that will run.  3.1.5 works on High Sierra and worked just fine on my Pixma 870.  Might work on yours.

Same problem with MP Navigator and High Sierra.  I was able to use it even with El Capitan.  Printer works but scanner function does not.  I have a MP970 and used it mostly for scanning 35mm color negatives and slides.

Announcements
03/14/2023: New firmware version 1.8.1 is available for EOS R6

03/02/2023: New Firmware Updates Are Available:

EOS R7 - Version 1.3.0EOS R10 - Version 1.3.0
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.