09-21-2023 06:42 PM
Hello!
My Pixima is approximately two years old. After I replaced the ink a few weeks ago with genuine Cannon ink, I've noticed that the prints are inconsistent. The ink levels are all full but it looks like there's something stuck or the printer is skipping because there are white voids where ink should be. I've checked inside and don't see anything obvious - is there a way to trouble shoot what's going on?
Thank you!
09-25-2023 02:15 PM
Hi,
I would start with a nozzle cleaning to see if that resolves the issue. Please click HERE for the steps.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.